Cisco Catalyst 6503-E Switch

Stack-based buffer overflow in the DCERPC inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.3 before 8.3(2.34), 8.4 before 8.4(4.4), 8.5 before 8.5(1.13), and 8.6 before 8.6(1.3) and the Firewall Services Module (FWSM) 4.1 before 4.1(9) in Cisco Catalyst 6500 series switches and 7600 series routers might allow remote attackers to execute arbitrary code via a crafted DCERPC packet, aka Bug IDs CSCtr21359 and CSCtr27522.

Buffer overflow in Cisco Adaptive Security Appliance (ASA) Software through 9.4.2.3 on ASA 5500, ASA 5500-X, ASA Services Module, ASA 1000V, ASAv, Firepower 9300 ASA Security Module, PIX, and FWSM devices allows remote authenticated users to execute arbitrary code via crafted IPv4 SNMP packets, aka Bug ID CSCva92151 or EXTRABACON.

Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.4 before 8.4(2.11) and 8.5 before 8.5(1.4) allow remote attackers to cause a denial of service (device reload) via (1) IPv4 or (2) IPv6 packets that trigger syslog message 305006, aka Bug ID CSCts39634.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 7.0 through 7.2 before 7.2(5.7), 8.0 before 8.0(5.27), 8.1 before 8.1(2.53), 8.2 before 8.2(5.8), 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.2) and the Firewall Services Module (FWSM) 3.1 and 3.2 before 3.2(23) and 4.0 and 4.1 before 4.1(8) in Cisco Catalyst 6500 series devices, when multicast routing is enabled, allow remote attackers to cause a denial of service (device reload) via a crafted IPv4 PIM message, aka Bug IDs CSCtr47517 and CSCtu97367.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.4 before 8.4(4.1), 8.5 before 8.5(1.11), and 8.6 before 8.6(1.3) allow remote attackers to cause a denial of service (device reload) via IPv6 transit traffic that triggers syslog message 110003, aka Bug ID CSCua27134.

The SIP inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.2 before 8.2(5.17), 8.3 before 8.3(2.28), 8.4 before 8.4(2.13), 8.5 before 8.5(1.4), and 8.6 before 8.6(1.5) allows remote attackers to cause a denial of service (device reload) via a crafted SIP media-update packet, aka Bug ID CSCtr63728.

A vulnerability in Cisco IOS Software for Cisco Catalyst 6000 Series Switches could allow an unauthenticated, adjacent attacker to cause an affected device to reload unexpectedly. This vulnerability is due to improper handling of process-switched traffic. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

The AAA functionality in the IPv4 SSL VPN implementations on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.2 before 8.2(5.30) and 8.3 before 8.3(2.34) allows remote attackers to cause a denial of service (device reload) via a crafted authentication response, aka Bug ID CSCtz04566.

The Threat Detection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.0 through 8.2 before 8.2(5.20), 8.3 before 8.3(2.29), 8.4 before 8.4(3), 8.5 before 8.5(1.6), and 8.6 before 8.6(1.1) allows remote attackers to cause a denial of service (device reload) via (1) IPv4 or (2) IPv6 packets that trigger a shun event, aka Bug ID CSCtw35765.

The UDP inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.0 before 8.0(5.25), 8.1 before 8.1(2.50), 8.2 before 8.2(5.5), 8.3 before 8.3(2.22), 8.4 before 8.4(2.1), and 8.5 before 8.5(1.2) does not properly handle flows, which allows remote attackers to cause a denial of service (device reload) via a crafted series of (1) IPv4 or (2) IPv6 UDP packets, aka Bug ID CSCtq10441.

The DCERPC inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.13) and the Firewall Services Module (FWSM) 4.1 before 4.1(7) in Cisco Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via a crafted DCERPC packet, aka Bug IDs CSCtr21346 and CSCtr27521.

The DCERPC inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.13) and the Firewall Services Module (FWSM) 4.1 before 4.1(7) in Cisco Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via a crafted DCERPC packet, aka Bug IDs CSCtr21376 and CSCtr27524.

The DHCP server on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 7.0 before 7.2(5.8), 7.1 before 7.2(5.8), 7.2 before 7.2(5.8), 8.0 before 8.0(5.28), 8.1 before 8.1(2.56), 8.2 before 8.2(5.27), 8.3 before 8.3(2.31), 8.4 before 8.4(3.10), 8.5 before 8.5(1.9), and 8.6 before 8.6(1.5) does not properly allocate memory for DHCP packets, which allows remote attackers to cause a denial of service (device reload) via a series of crafted IPv4 packets, aka Bug ID CSCtw84068.

A vulnerability in the Virtual Private LAN Service (VPLS) code of Cisco IOS 15.0 through 15.4 for Cisco Catalyst 6800 Series Switches could allow an unauthenticated, adjacent attacker to cause a C6800-16P10G or C6800-16P10G-XL type line card to crash, resulting in a denial of service (DoS) condition. The vulnerability is due to a memory management issue in the affected software. An attacker could exploit this vulnerability by creating a large number of VPLS-generated MAC entries in the MAC address table of an affected device. A successful exploit could allow the attacker to cause a C6800-16P10G or C6800-16P10G-XL type line card to crash, resulting in a DoS condition. This vulnerability affects Cisco Catalyst 6800 Series Switches that are running a vulnerable release of Cisco IOS Software and have a Cisco C6800-16P10G or C6800-16P10G-XL line card in use with Supervisor Engine 6T. To be vulnerable, the device must also be configured with VPLS and the C6800-16P10G or C6800-16P10G-XL line card needs to be the core-facing MPLS interfaces. Cisco Bug IDs: CSCva61927.

The IKE implementation in the WS-IPSEC-3 service module in Cisco IOS 12.2 on Catalyst 6500 devices allows remote authenticated users to cause a denial of service (device reload) by sending a crafted message during IPsec tunnel setup, aka Bug ID CSCur70505.

The HTTP server in Cisco IOS on Catalyst switches does not properly handle TCP socket events, which allows remote attackers to cause a denial of service (device crash) via crafted packets on TCP port (1) 80 or (2) 443, aka Bug ID CSCuc53853.

L2 network filtering can be bypassed using stacked VLAN0 and LLC/SNAP headers