VendorsCiscofirepower_2130any version
Vulnerabilities

Cisco FirePOWER 2130 any version

Ranked by severity, then by exploit likelihood. Click a CVE ID for its full record.

31CVEs
CVE-2021-44228
Apache Log4j2 JNDI features do not protect against attacker controlled LDAP and other JNDI related endpoints
Published 2021-12-10 · Analyzed
10.0KEV3 PoCEPSS 1.000
CVE-2024-20412
A vulnerability in Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 1000, 2100, 3100, and 4200 Series could allow an unauthenticated, local attacker to access an affected system using static credentials. This vulnerability is due to the presence of static accounts with hard-coded passwords on an affected system. An attacker could exploit this vulnerability by logging in to the CLI of an affected device with these credentials. A successful exploit could allow the attacker to access the affected system and retrieve sensitive information, perform limited troubleshooting actions, modify some configuration options, or render the device unable to boot to the operating system, requiring a reimage of the device.
Published 2024-10-23 · Analyzed
9.3EPSS 0.002
CVE-2022-20829
Cisco Adaptive Security Device Manager and Adaptive Security Appliance Software Client-side Arbitrary Code Execution Vulnerability
Published 2022-06-24 · Modified
9.1EPSS 0.034
CVE-2022-20828
Cisco FirePOWER Software for ASA FirePOWER Module Command Injection Vulnerability
Published 2022-06-24 · Modified
9.0EPSS 0.493
CVE-2018-0240
Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456.
Published 2018-04-19 · Modified
8.6EPSS 0.039
CVE-2019-1703
Cisco Firepower Threat Defense Software Packet Processing Denial of Service Vulnerability
Published 2019-05-03 · Modified
8.6EPSS 0.029
CVE-2019-1714
Cisco Adaptive Security Appliance Software and Firepower Threat Defense Software VPN SAML Authentication Bypass Vulnerability
Published 2019-05-03 · Modified
8.6EPSS 0.020
CVE-2020-3562
Cisco Firepower 2100 Series SSL/TLS Inspection Denial of Service Vulnerability
Published 2020-10-21 · Modified
8.6EPSS 0.018
CVE-2021-1402
Cisco Firepower Threat Defense Software SSL Decryption Policy Denial of Service Vulnerability
Published 2021-04-29 · Modified
8.6EPSS 0.014
CVE-2022-20751
Cisco Firepower Threat Defense Software Snort Out of Memory Denial of Service Vulnerability
Published 2022-05-03 · Modified
8.6EPSS 0.013
CVE-2023-20006
A vulnerability in the hardware-based SSL/TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to an implementation error within the cryptographic functions for SSL/TLS traffic processing when they are offloaded to the hardware. An attacker could exploit this vulnerability by sending a crafted stream of SSL/TLS traffic to an affected device. A successful exploit could allow the attacker to cause an unexpected error in the hardware-based cryptography engine, which could cause the device to reload.
Published 2023-06-28 · Modified
8.6EPSS 0.009
CVE-2023-20244
A vulnerability in the internal packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Firewalls could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain packets when they are sent to the inspection engine. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to deplete all 9,472 byte blocks on the device, resulting in traffic loss across the device or an unexpected reload of the device. If the device does not reload on its own, a manual reload of the device would be required to recover from this state.
Published 2023-11-01 · Modified
8.6EPSS 0.008
CVE-2024-20330
Cisco Firepower Threat Defense Software for Cisco Firepower 2100 Series TCP UDP Snort 2 and Snort 2 Denial of Service Vulnerability
Published 2024-10-23 · Analyzed
8.6EPSS 0.007
CVE-2020-3167
Cisco FXOS and UCS Manager Software CLI Command Injection Vulnerability
Published 2020-02-26 · Modified
7.8EPSS 0.009
CVE-2020-3171
Cisco FXOS and UCS Manager Software Local Management CLI Command Injection Vulnerability
Published 2020-02-26 · Modified
7.8EPSS 0.005
CVE-2021-1422
Cisco Adaptive Security Appliance Software Release 9.16.1 and Cisco Firepower Threat Defense Software Release 7.0.0 IPsec Denial of Service Vulnerability
Published 2021-07-16 · Modified
7.7EPSS 0.012
CVE-2022-20866
Cisco Adaptive Security Appliance Software and Firepower Threat Defense Software RSA Private Key Leak Vulnerability
Published 2022-08-10 · Modified
7.5EPSS 0.174
CVE-2019-12696
Cisco Firepower System Software Detection Engine RTF and RAR Malware and File Policy Bypass Vulnerabilities
Published 2019-10-02 · Modified
7.5EPSS 0.015
CVE-2019-12697
Cisco Firepower System Software Detection Engine RTF and RAR Malware and File Policy Bypass Vulnerabilities
Published 2019-10-02 · Modified
7.5EPSS 0.015
CVE-2022-20795
Cisco Adaptive Security Appliance and Cisco Firepower Threat Defense Software AnyConnect SSL VPN Denial of Service Vulnerability
Published 2022-04-21 · Modified
7.5EPSS 0.007
CVE-2020-3334
Cisco Firepower 2100 Series Security Appliances ARP Denial of Service Vulnerability
Published 2020-05-06 · Modified
7.4EPSS 0.004
CVE-2019-1649
Cisco Secure Boot Hardware Tampering Vulnerability
Published 2019-05-13 · Modified
7.2EPSS 0.006
CVE-2020-3457
Cisco FXOS Software Command Injection Vulnerability
Published 2020-10-21 · Modified
7.2EPSS 0.004
CVE-2021-1488
Cisco Adaptive Security Appliance Software and Firepower Threat Defense Software for Firepower 1000 and 2100 Series Appliances Command Injection Vulnerability
Published 2021-04-29 · Modified
7.2EPSS 0.003
CVE-2021-1489
Cisco Firepower Device Manager Software Filesystem Space Exhaustion Denial of Service Vulnerability
Published 2021-04-29 · Modified
6.8EPSS 0.012
CVE-2020-3458
Cisco Adaptive Security Appliance Software and Firepower Threat Defense Software for Firepower 1000/2100 Series Appliances Secure Boot Bypass Vulnerabilities
Published 2020-10-21 · Modified
6.7EPSS 0.003
CVE-2020-3166
Cisco FXOS Software CLI Arbitrary File Read and Write Vulnerability
Published 2020-02-26 · Modified
6.7EPSS 0.003
CVE-2019-1695
Cisco Adaptive Security Appliance and Firepower Threat Defense Software Layer 2 Filtering Bypass Vulnerability
Published 2019-05-03 · Modified
6.5EPSS 0.007
CVE-2019-1690
Cisco Application Policy Infrastructure Controller IPv6 Link-Local Address Vulnerability
Published 2019-03-11 · Modified
6.5EPSS 0.006
CVE-2023-20234
A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to create a file or overwrite any file on the filesystem of an affected device, including system files. The vulnerability occurs because there is no validation of parameters when a specific CLI command is used. An attacker could exploit this vulnerability by authenticating to an affected device and using the command at the CLI. A successful exploit could allow the attacker to overwrite any file on the disk of the affected device, including system files. The attacker must have valid administrative credentials on the affected device to exploit this vulnerability.
Published 2023-08-23 · Modified
6.0EPSS 0.002
CVE-2020-3504
Cisco UCS Manager Software Local Management CLI Denial of Service Vulnerability
Published 2020-08-27 · Modified
3.3EPSS 0.003