Cisco IOS 12.2ys

Cisco IOS 12.0 to 12.4 might allow remote attackers to execute arbitrary code via a heap-based buffer overflow in system timers. NOTE: this issue does not correspond to a specific vulnerability, rather a general weakness that only increases the feasibility of exploitation of any vulnerabilities that might exist. Such design-level weaknesses normally are not included in CVE, so perhaps this issue should be REJECTed.

Cisco IOS 11.x and 12.0 through 12.2 allows remote attackers to cause a denial of service (traffic block) by sending a particular sequence of IPv4 packets to an interface on the device, causing the input queue on that interface to be marked as full.

Unspecified vulnerability in Cisco IOS 12.0 through 12.4 allows remote attackers to cause a denial of service (device reload) via a crafted Protocol Independent Multicast (PIM) packet.

The SIP implementation in Cisco Unified Communications Manager (CUCM) 6.x and 7.x before 7.1(5b)su5, 8.x before 8.5(1)su4, and 8.6 before 8.6(2a)su1; Cisco IOS 12.2 through 12.4 and 15.0 through 15.2; and Cisco IOS XE 3.3.xSG before 3.3.1SG, 3.4.xS, and 3.5.xS allows remote attackers to cause a denial of service (service crash or device reload) via a crafted SIP message containing an SDP session description, aka Bug IDs CSCtw66721, CSCtj33003, and CSCtw84664.

Memory leak in the NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (memory consumption or device reload) by sending crafted SIP packets to UDP port 5060, aka Bug ID CSCtj04672.

Unspecified vulnerability in the NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload or hang) by sending crafted SIP packets to TCP port 5060, aka Bug ID CSCso02147.

Unspecified vulnerability in the NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload) by sending crafted H.323 packets to TCP port 1720, aka Bug ID CSCth11006.

Unspecified vulnerability in the NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload) by sending crafted SIP packets to UDP port 5060, aka Bug ID CSCti48483.

The SCP server in Cisco IOS 12.2 through 12.4, when Role-Based CLI Access is enabled, does not enforce the CLI view configuration for file transfers, which allows remote authenticated users with an attached CLI view to (1) read or (2) overwrite arbitrary files via an SCP command.

Secure Shell (SSH) 2 in Cisco IOS 12.0 through 12.3 allows remote attackers to cause a denial of service (device reload) (1) via a username that contains a domain name when using a TACACS+ server to authenticate, (2) when a new SSH session is in the login phase and a currently logged in user issues a send command, or (3) when IOS is logging messages and an SSH session is terminated while the server is sending data.

The (1) Airline Product Set (aka ALPS), (2) Serial Tunnel Code (aka STUN), (3) Block Serial Tunnel Code (aka BSTUN), (4) Native Client Interface Architecture (NCIA) support, (5) Data-link switching (aka DLSw), (6) Remote Source-Route Bridging (RSRB), (7) Point to Point Tunneling Protocol (PPTP), (8) X.25 for Record Boundary Preservation (RBP), (9) X.25 over TCP (XOT), and (10) X.25 Routing features in Cisco IOS 12.2 and 12.4 allows remote attackers to cause a denial of service (device reload) via a series of crafted TCP packets.

Cisco IOS 12.0 through 12.3YL, with BGP enabled and running the bgp log-neighbor-changes command, allows remote attackers to cause a denial of service (device reload) via a malformed BGP packet.