Cisco IOS 15.0\(2\)ed1

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Autonomic Networking Infrastructure (ANI) implementation in Cisco IOS 12.2, 12.4, 15.0, 15.2, 15.3, and 15.4 and IOS XE 3.10.xS through 3.13.xS before 3.13.1S allows remote attackers to spoof Autonomic Networking Registration Authority (ANRA) responses, and consequently bypass intended device and node access restrictions or cause a denial of service (disrupted domain access), via crafted AN messages, aka Bug ID CSCup62191.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut47751.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut50727.

Memory leak in the Smart Install client implementation in Cisco IOS 12.2 and 15.0 through 15.2 and IOS XE 3.2 through 3.8 allows remote attackers to cause a denial of service (memory consumption) via crafted image-list parameters, aka Bug ID CSCuy82367.

Cisco IOS 12.2 and 15.0 through 15.3 and IOS XE 3.1 through 3.9 allow remote attackers to cause a denial of service (device restart) via a crafted IPv4 Multicast Source Discovery Protocol (MSDP) Source-Active (SA) message, aka Bug ID CSCud36767.

Cisco IOS 12.2, 12.4, 15.0, 15.2, and 15.3 allows remote attackers to cause a denial of service (device reload) via malformed Common Industrial Protocol (CIP) TCP packets, aka Bug ID CSCun63514.

Cisco IOS 12.2, 12.4, 15.0, 15.2, and 15.3 allows remote attackers to cause a denial of service (device reload) via malformed Common Industrial Protocol (CIP) UDP packets, aka Bug ID CSCum98371.

Memory leak in Cisco IOS 12.2, 12.4, 15.0, 15.2, and 15.3 allows remote attackers to cause a denial of service (memory consumption) via crafted Common Industrial Protocol (CIP) TCP packets, aka Bug ID CSCun49658.

The Autonomic Networking Infrastructure (ANI) implementation in Cisco IOS 12.2, 12.4, 15.0, 15.2, 15.3, and 15.4 and IOS XE 3.10.xS through 3.13.xS before 3.13.1S allows remote attackers to cause a denial of service (disrupted domain access) via spoofed AN messages that reset a finite state machine, aka Bug ID CSCup62293.

The Autonomic Networking Infrastructure (ANI) implementation in Cisco IOS 12.2, 12.4, 15.0, 15.2, 15.3, and 15.4 and IOS XE 3.10.xS through 3.13.xS before 3.13.1S allows remote attackers to cause a denial of service (device reload) via spoofed AN messages, aka Bug ID CSCup62315.

Cisco IOS 12.4 and 15.0 through 15.6 and IOS XE 3.1 through 3.18 and 16.1 allow remote attackers to cause a denial of service (memory consumption or device reload) via fragmented IKEv1 packets, aka Bug ID CSCuy47382.

The TFTP server in Cisco IOS 12.2(44)SQ1, 12.2(33)XN1, 12.4(25e)JAM1, 12.4(25e)JAO5m, 12.4(23)JY, 15.0(2)ED1, 15.0(2)EY3, 15.1(3)SVF4a, and 15.2(2)JB1 and IOS XE 2.5.x, 2.6.x, 3.1.xS, 3.2.xS, 3.3.xS, 3.4.xS, and 3.5.xS before 3.6.0S; 3.1.xSG, 3.2.xSG, and 3.3.xSG before 3.4.0SG; 3.2.xSE before 3.3.0SE; 3.2.xXO before 3.3.0XO; 3.2.xSQ; 3.3.xSQ; and 3.4.xSQ allows remote attackers to cause a denial of service (device hang or reload) via multiple requests that trigger improper memory management, aka Bug ID CSCts66733.

Cisco IOS 12.2, 12.4, 15.0, 15.2, and 15.3, when a VRF interface is configured, allows remote attackers to cause a denial of service (interface queue wedge) via crafted ICMPv4 packets, aka Bug ID CSCsi02145.