Cisco IOS Xe

Cisco IOS XE 3.7S(.1) and earlier allows remote attackers to cause a denial of service (Packet Processor crash) via fragmented MPLS IP packets, aka Bug ID CSCul00709.

Cisco IOS 12.0(32)S12 through 12.0(32)S13 and 12.0(33)S3 through 12.0(33)S4, 12.0(32)SY8 through 12.0(32)SY9, 12.2(33)SXI1 through 12.2(33)SXI2, 12.2XNC before 12.2(33)XNC2, 12.2XND before 12.2(33)XND1, and 12.4(24)T1; and IOS XE 2.3 through 2.3.1t and 2.4 through 2.4.0; when RFC4893 BGP routing is enabled, allows remote attackers to cause a denial of service (device reload) by using an RFC4271 peer to send a malformed update, aka Bug ID CSCta33973.

The Cisco Express Forwarding processing module in Cisco IOS XE allows remote attackers to cause a denial of service (device reload) via crafted MPLS packets that are not properly handled during IP header validation, aka Bug ID CSCuj23992.

Cisco IOS 15.0 and 15.1 and IOS XE 3.x do not properly handle the "set mpls experimental imposition" command, which allows remote attackers to cause a denial of service (device crash) via network traffic that triggers (1) fragmentation or (2) reassembly, aka Bug ID CSCtr56576.

A vulnerability in the web-based management interface of Cisco IOS XE Software could allow an authenticated, low-privileged, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web-based management interface. A successful exploit could allow the attacker to read limited files from the underlying operating system or clear the syslog and licensing logs on the affected device.

Cisco IOS XE Software Gigabit Ethernet Management Interface Access Control List Bypass Vulnerability

Multiple Cisco Products Snort Application Detection Engine Policy Bypass Vulnerability

Cisco IOS 12.4 and 15.0 through 15.5 and IOS XE 3.13 through 3.17 allow remote authenticated users to cause a denial of service (device reload) via crafted attributes in a BGP message, aka Bug ID CSCuz21061.

Cisco IOS XE Software for Network Convergence System 520 Routers Denial of Service Vulnerability

A vulnerability in the Cisco IOx application hosting environment of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the Cisco IOx application hosting environment to stop responding, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to cause the Cisco IOx application hosting environment to stop responding. The IOx process will need to be manually restarted to recover services.

The NTP implementation in Cisco IOS and IOS XE does not properly support use of the access-group command for a "deny all" configuration, which allows remote attackers to bypass intended restrictions on time synchronization via a standard query, aka Bug ID CSCuj66318.

The packet-reassembly implementation in Cisco IOS XE 3.13S and earlier allows remote attackers to cause a denial of service (CPU consumption or packet loss) via fragmented (1) IPv4 or (2) IPv6 packets that trigger ATTN-3-SYNC_TIMEOUT errors after reassembly failures, aka Bug ID CSCuo37957.

The IKE implementation in Cisco IOS 15.4(1)T and earlier and IOS XE allows remote attackers to cause a denial of service (security-association drop) via crafted Main Mode packets, aka Bug ID CSCun31021.

The IKEv1 state machine in Cisco IOS 15.4 through 15.6 and IOS XE 3.15 through 3.17 allows remote attackers to cause a denial of service (IPsec connection termination) via a crafted IKEv1 packet to a tunnel endpoint, aka Bug ID CSCuw08236.

The Autonomic Networking Infrastructure (ANI) component in Cisco IOS XE does not properly validate certificates, which allows remote attackers to spoof devices via crafted messages, aka Bug ID CSCuq22647.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to write arbitrary files to the operating system of an affected device. The vulnerability is due to insufficient input validation of HTTP requests that are sent to the web UI of the affected software. An attacker could exploit this vulnerability by sending a malicious HTTP request to the web UI of the affected software. A successful exploit could allow the attacker to write arbitrary files to the operating system of an affected device. Cisco Bug IDs: CSCvb22645.

The mDNS implementation in Cisco IOS XE 3.12S does not properly interact with autonomic networking, which allows remote attackers to obtain sensitive networking-services information by sniffing the network or overwrite networking-services data via a crafted mDNS response, aka Bug ID CSCun64867.

Cisco IOS and IOS XE Software Stored Banner Cross-Site Scripting Vulnerability

Cisco IOS XE enables the IPv6 Routing Protocol for Low-Power and Lossy Networks (aka RPL) on both the Autonomic Control Plane (ACP) and external Autonomic Networking Infrastructure (ANI) interfaces, which allows remote attackers to conduct route-injection attacks via crafted RPL advertisements on an ANI interface, aka Bug ID CSCuq22673.

Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family Stored Cross-Site Scripting Vulnerability

Cisco IOS XE Software H.323 Application Level Gateway Bypass Vulnerability

L2 network filtering can be bypassed using stacked VLAN0 and LLC/SNAP headers

Cisco IOS XE Software Catalyst 9800 Series Wireless Controllers Denial of Service Vulnerability

Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family Improper Access Control Vulnerability

A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device. Cisco Bug IDs: CSCvf10783.

Cisco IOS XE SD-WAN Software Path Traversal Vulnerability

Cisco IOS and IOS XE Software Information Disclosure Vulnerability

Cisco IOS XE Software Web UI Improper Input Validation Vulnerability

The Locator/ID Separation Protocol (LISP) implementation in Cisco IOS 15.3(3)S and earlier and IOS XE does not properly validate parameters in ITR control messages, which allows remote attackers to cause a denial of service (CEF outage and packet drops) via malformed messages, aka Bug ID CSCun73782.

Cisco IOS XE Software Web UI Denial of Service Vulnerabilities

Cisco IOS XE Software Web UI Denial of Service Vulnerabilities

A vulnerability in Cisco IOS XE Software running on Cisco cBR Series Converged Broadband Routers could allow an unauthenticated, adjacent attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect handling of certain DHCP packets. An attacker could exploit this vulnerability by sending certain DHCP packets to a specific segment of an affected device. A successful exploit could allow the attacker to increase CPU usage on the affected device and cause a DoS condition. Cisco Bug IDs: CSCvg73687.

A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751.

The Autonomic Networking Infrastructure (ANI) component in Cisco IOS XE does not properly validate certificates, which allows remote attackers to trigger acceptance of an invalid message via crafted messages, aka Bug ID CSCuq22677.

Cisco IOS XE Software Web UI Unauthenticated Proxy Service Vulnerability

A vulnerability in the Network Configuration Access Control Module (NACM) of Cisco IOS XE Software could allow an authenticated, remote attacker to obtain unauthorized read access to configuration or operational data. This vulnerability exists because a subtle change in inner API call behavior causes results to be filtered incorrectly. An attacker could exploit this vulnerability by using either NETCONF, RESTCONF, or gRPC Network Management Interface (gNMI) protocols and query data on paths that may have been denied by the NACM configuration. A successful exploit could allow the attacker to access data that should have been restricted according to the NACM configuration. Note: This vulnerability requires that the attacker obtain the credentials from a valid user with privileges lower than 15, and that NACM was configured to provide restricted read access for that user.

A vulnerability in Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on the control plane of an affected device. This vulnerability is due to improper handling of frames with VLAN tag information. An attacker could exploit this vulnerability by sending crafted frames to an affected device. A successful exploit could allow the attacker to render the control plane of the affected device unresponsive. The device would not be accessible through the console or CLI, and it would not respond to ping requests, SNMP requests, or requests from other control plane protocols. Traffic that is traversing the device through the data plane is not affected. A reload of the device is required to restore control plane services.

A vulnerability in the web-based management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform a CSRF attack and execute commands on the CLI of an affected device. This vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading an already authenticated user to follow a crafted link. A successful exploit could allow the attacker to clear the syslog, parser, and licensing logs on the affected device if the targeted user has privileges to clear those logs.

A vulnerability in the package unbundle utility of Cisco IOS XE Software could allow an authenticated, local attacker to gain write access to some files in the underlying operating system. This vulnerability affects the following products if they are running a vulnerable release of Cisco IOS XE Software: Cisco 5700 Series Wireless LAN Controllers, Cisco Catalyst 3650 Series Switches, Cisco Catalyst 3850 Series Switches, Cisco Catalyst 4500E Series Switches, Cisco Catalyst 4500X Series Switches. More Information: CSCva60013 CSCvb22622. Known Affected Releases: 3.7(0) 16.4.1 Denali-16.1.3 Denali-16.2.2 Denali-16.3.1. Known Fixed Releases: 15.2(4)E3 16.1(2.208) 16.2(2.42) 16.3(1.22) 16.4(0.190) 16.5(0.29).