Cisco IOS Xe 3.18.2s

Cisco IOS, IOS XE, IOS XR, and NX-OS Software One Platform Kit Remote Code Execution Vulnerability

Cisco IOS XE Software Command Injection Vulnerability

Cisco IOS and IOS XE Software IP Service Level Agreement Denial of Service Vulnerability

Cisco IOS and IOS XE Software Network-Based Application Recognition Denial of Service Vulnerability

Cisco IOS and IOS XE Software Network-Based Application Recognition Denial of Service Vulnerabilities

Cisco IOS and IOS XE Software Network-Based Application Recognition Denial of Service Vulnerabilities

Cisco IOS XE Software DNS NAT Protocol Application Layer Gateway Denial of Service Vulnerability

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the DHCP code for the Zero Touch Provisioning feature of Cisco ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a format string vulnerability when processing a crafted DHCP packet for Zero Touch Provisioning. An attacker could exploit this vulnerability by sending a specially crafted DHCP packet to an affected device. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco ASR 920 Series Aggregation Services Routers that are running an affected release of Cisco IOS XE Software (3.13 through 3.18) and are listening on the DHCP server port. By default, the devices do not listen on the DHCP server port. Cisco Bug IDs: CSCuy56385.

Cisco IOS XE Software Plug-and-Play Privilege Escalation Vulnerability

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow the following: An authenticated, remote attacker with low privileges could cause a denial of service (DoS) condition on an affected device that is running Cisco IOS Software or Cisco IOS XE Software. To cause the DoS, the attacker must have the SNMPv2c or earlier read-only community string or valid SNMPv3 user credentials. An authenticated, remote attacker with high privileges could execute code as the root user on an affected device that is running Cisco IOS XE Software. To execute code as the root user, the attacker must have the SNMPv1 or v2c read-only community string or valid SNMPv3 user credentials and administrative or privilege 15 credentials on the affected device. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device over IPv4 or IPv6 networks. This vulnerability is due to a stack overflow condition in the SNMP subsystem of the affected software. A successful exploit could allow a low-privileged attacker to cause the affected system to reload, resulting in a DoS condition, or allow a high-privileged attacker to execute arbitrary code as the root user and obtain full control of the affected system. Note: This vulnerability affects all versions of SNMP.

Cisco ASR 920 Series Aggregation Services Router Model 12SZ-IM SNMP Denial of Service Vulnerability

A vulnerability in the SNMP subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to improper error handling when parsing SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.  This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMP v2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMP v3, the attacker must have valid SNMP user credentials for the affected system.

A vulnerability in the UDP processing code of Cisco IOS 15.1, 15.2, and 15.4 and IOS XE 3.14 through 3.18 could allow an unauthenticated, remote attacker to cause the input queue of an affected system to hold UDP packets, causing an interface queue wedge and a denial of service (DoS) condition. The vulnerability is due to Cisco IOS Software application changes that create UDP sockets and leave the sockets idle without closing them. An attacker could exploit this vulnerability by sending UDP packets with a destination port of 0 to an affected device. A successful exploit could allow the attacker to cause UDP packets to be held in the input interfaces queue, resulting in a DoS condition. The input interface queue will stop holding UDP packets when it receives 250 packets. Cisco Bug IDs: CSCup10024, CSCva55744, CSCva95506.

A vulnerability in the Autonomic Networking Infrastructure (ANI) registrar feature of Cisco IOS Software (possibly 15.2 through 15.6) and Cisco IOS XE Software (possibly 3.7 through 3.18, and 16) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted autonomic network channel discovery packet to a device that has all the following characteristics: (1) running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature; (2) configured as an autonomic registrar; (3) has a whitelist configured. An exploit could allow the attacker to cause the affected device to reload. Note: Autonomic networking should be configured with a whitelist. Do not remove the whitelist as a workaround. Cisco Bug IDs: CSCvc42717.

Cisco Aggregation Services Router 900 Route Switch Processor 3 OSPFv2 Denial of Service Vulnerability

A vulnerability in the Cisco Express Forwarding functionality of Cisco IOS XE Software for Cisco ASR 903 Aggregation Services Routers with Route Switch Processor 3 (RSP3C) could allow an unauthenticated, adjacent attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper memory management when Cisco IOS XE Software is processing Address Resolution Protocol (ARP) messages. An attacker could exploit this vulnerability by sending crafted ARP messages at a high rate over a period of time to an affected device. A successful exploit could allow the attacker to exhaust system resources, which eventually triggers a reload of the active route switch processor (RSP). If a redundant RSP is not present, the router reloads.

A vulnerability in motherboard console ports of line cards for Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to access an affected device's operating system. The vulnerability exists because an engineering console port is available on the motherboard of the affected line cards. An attacker could exploit this vulnerability by physically connecting to the console port on the line card. A successful exploit could allow the attacker to gain full access to the affected device's operating system. This vulnerability affects only Cisco ASR 1000 Series Routers that have removable line cards and Cisco cBR-8 Converged Broadband Routers, if they are running certain Cisco IOS XE 3.16 through 16.5 releases. Cisco Bug IDs: CSCvc65866, CSCve77132.

Cisco IOS XE Software Privilege Escalation Vulnerability

Cisco IOS XE Software Privilege Escalation Vulnerability

Cisco IOS XE Software Digital Signature Verification Bypass Vulnerability

A vulnerability in the Autonomic Networking Infrastructure (ANI) feature of Cisco IOS Software (15.4 through 15.6) and Cisco IOS XE Software (3.7 through 3.18, and 16) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted IPv6 packet to a device that is running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature. A device must meet two conditions to be affected by this vulnerability: (1) the device must be running a version of Cisco IOS Software or Cisco IOS XE Software that supports ANI (regardless of whether ANI is configured); and (2) the device must have a reachable IPv6 interface. An exploit could allow the attacker to cause the affected device to reload. Cisco Bug IDs: CSCvc42729.

Cisco IOS XE Software Border Gateway Protocol Resource Public Key Infrastructure Denial of Service Vulnerability

Cisco IOS XE Software Arbitrary Code Execution Vulnerability

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with administrative privileges to execute arbitrary commands as root on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by logging in to the device CLI with valid administrative (level 15) credentials and using crafted commands at the CLI prompt. A successful exploit could allow the attacker to execute arbitrary commands as root.

A vulnerability in the Autonomic Networking feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause autonomic nodes of an affected system to reload, resulting in a denial of service (DoS) condition. More Information: CSCvd88936. Known Affected Releases: Denali-16.2.1 Denali-16.3.1.

A vulnerability in the Autonomic Networking feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to reset the Autonomic Control Plane (ACP) of an affected system and view ACP packets that are transferred in clear text within an affected system, an Information Disclosure Vulnerability. More Information: CSCvd51214. Known Affected Releases: Denali-16.2.1 Denali-16.3.1.

A vulnerability in the web UI feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system through the web UI. This vulnerability is due to incorrectly accepting configuration changes through the HTTP GET method. An attacker could exploit this vulnerability by persuading a currently authenticated administrator to follow a crafted link. A successful exploit could allow the attacker to change the configuration of the affected device.

Cisco IOS and IOS XE Software Smart Call Home Certificate Validation Vulnerability

A vulnerability in auxiliary asynchronous port (AUX) functions of Cisco IOS XE Software could allow an authenticated, local attacker to cause an affected device to reload or stop responding. This vulnerability is due to the incorrect handling of specific ingress traffic when flow control hardware is enabled on the AUX port. An attacker could exploit this vulnerability by reverse telnetting to the AUX port and sending specific data after connecting. A successful exploit could allow the attacker to cause the device to reset or stop responding, resulting in a denial of service (DoS) condition.