Cisco IOS Xe 3.7.1s

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

Cisco IOS and IOS XE Software IP Service Level Agreement Denial of Service Vulnerability

Cisco IOS XE Software DNS NAT Protocol Application Layer Gateway Denial of Service Vulnerability

A vulnerability in the Locator ID Separation Protocol (LISP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to the incorrect handling of LISP packets. An attacker could exploit this vulnerability by sending a crafted LISP packet to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Note: This vulnerability could be exploited over either IPv4 or IPv6 transport.

A vulnerability in the Multicast Leaf Recycle Elimination (mLRE) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to incorrect handling of certain IPv6 multicast packets when they are fanned out more than seven times on an affected device. An attacker could exploit this vulnerability by sending a specific IPv6 multicast or IPv6 multicast VPN (MVPNv6) packet through the affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

Cisco IOS 12.0, 12.2, 12.4, 15.0, 15.1, 15.2, and 15.3 and IOS XE 2.x and 3.x before 3.7.4S; 3.2.xSE and 3.3.xSE before 3.3.2SE; 3.3.xSG and 3.4.xSG before 3.4.4SG; and 3.8.xS, 3.9.xS, and 3.10.xS before 3.10.1S allow remote attackers to cause a denial of service (device reload) via malformed RSVP packets, aka Bug ID CSCui11547.

Cisco IOS XE 3.1 through 3.17 and 16.1 on 64-bit platforms allows remote attackers to cause a denial of service (data-structure corruption and device reload) via fragmented IPv4 packets, aka Bug ID CSCux66005.

A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353.

Cisco IOS 12.2 and 15.0 through 15.3 and IOS XE 3.2 through 3.7 before 3.7.5S and 3.8 through 3.10 before 3.10.1S allow remote attackers to cause a denial of service (device reload) via a malformed IKEv2 packet, aka Bug ID CSCui88426.

Cisco IOS 15.1 through 15.3 and IOS XE 3.3 and 3.5 before 3.5.2E; 3.7 before 3.7.5S; and 3.8, 3.9, and 3.10 before 3.10.2S allow remote attackers to cause a denial of service (I/O memory consumption and device reload) via a malformed IPv6 packet, aka Bug ID CSCui59540.

Cisco IOS XE 3.1 through 3.17 and 16.1 through 16.2 allows remote attackers to cause a denial of service (device reload) via crafted ICMP packets that require NAT, aka Bug ID CSCuw85853.

The TCP reassembly feature in Cisco IOS XE 3.7 before 3.7.3S and 3.8 before 3.8.1S on 1000 ASR devices allows remote attackers to cause a denial of service (device reload) via large TCP packets that are processed by the (1) NAT or (2) ALG component, aka Bug ID CSCud72509.

Cisco IOS 12.2 through 12.4 and 15.0 through 15.3, and IOS XE 2.1 through 3.9, allows remote attackers to cause a denial of service (device reload) via crafted DHCP packets that are processed locally by a (1) server or (2) relay agent, aka Bug ID CSCug31561.

Cisco IOS 15.0 through 15.3 and IOS XE 3.2 through 3.8, when a VRF interface exists, allows remote attackers to cause a denial of service (interface queue wedge) via crafted UDP RSVP packets, aka Bug ID CSCuf17023.

The NTP implementation in Cisco IOS 15.1 and 15.5 and IOS XE 3.2 through 3.17 allows remote attackers to modify the system time via crafted packets, aka Bug ID CSCux46898.

Cisco IOS XE Software Digital Signature Verification Bypass Vulnerability

Cisco IOS XE Software Border Gateway Protocol Resource Public Key Infrastructure Denial of Service Vulnerability

A vulnerability in a startup script of Cisco IOS XE Software could allow an unauthenticated attacker with physical access to the targeted system to execute arbitrary commands on the underlying operating system with the privileges of the root user. More Information: CSCuz06639 CSCuz42122. Known Affected Releases: 15.6(1.1)S 16.1.2 16.2.0 15.2(1)E. Known Fixed Releases: Denali-16.1.3 16.2(1.8) 16.1(2.61) 15.6(2)SP 15.6(2)S1 15.6(1)S2 15.5(3)S3a 15.5(3)S3 15.5(2)S4 15.5(1)S4 15.4(3)S6a 15.4(3)S6 15.3(3)S8a 15.3(3)S8 15.2(5)E 15.2(4)E3 15.2(3)E5 15.0(2)SQD3 15.0(1.9.2)SQD3 3.9(0)E.

Cisco IOS XE Software Arbitrary Code Execution Vulnerability

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the web UI feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system through the web UI. This vulnerability is due to incorrectly accepting configuration changes through the HTTP GET method. An attacker could exploit this vulnerability by persuading a currently authenticated administrator to follow a crafted link. A successful exploit could allow the attacker to change the configuration of the affected device.

Cisco IOS XE 3.8S(.2) and earlier does not properly use a DHCP pool during assignment of an IP address, which allows remote authenticated users to cause a denial of service (device reload) via an AAA packet that triggers an address requirement, aka Bug ID CSCuh04949.

Cisco ASR 1000 devices with software before 3.8S, when BDI routing is enabled, allow remote attackers to cause a denial of service (device reload) via crafted (1) broadcast or (2) multicast ICMP packets with fragmentation, aka Bug ID CSCub55948.

A vulnerability in auxiliary asynchronous port (AUX) functions of Cisco IOS XE Software could allow an authenticated, local attacker to cause an affected device to reload or stop responding. This vulnerability is due to the incorrect handling of specific ingress traffic when flow control hardware is enabled on the AUX port. An attacker could exploit this vulnerability by reverse telnetting to the AUX port and sending specific data after connecting. A successful exploit could allow the attacker to cause the device to reset or stop responding, resulting in a denial of service (DoS) condition.