F5 Big-ip Local Traffic Manager any version

0-byte record padding oracle

The HTTPS protocol, as used in unspecified web applications, can encrypt compressed data without properly obfuscating the length of the unencrypted data, which makes it easier for man-in-the-middle attackers to obtain plaintext secret values by observing length differences during a series of guesses in which a string in an HTTP request URL potentially matches an unknown string in an HTTP response body, aka a "BREACH" attack, a different issue than CVE-2012-4929.

A race condition when discarding malformed packets can cause BIND to exit with an assertion failure

In F5 BIG-IP LTM, AAM, AFM, APM, ASM, Link Controller, PEM, PSM software version 12.0.0 to 12.1.2, 11.6.0 to 11.6.1, 11.4.0 to 11.5.4, when a virtual server uses the standard configuration of HTTP/2 or SPDY profile with Client SSL profile, and the client initiates a number of concurrent streams beyond the advertised limit can cause a disruption of service. Remote client initiating stream beyond the advertised limit can cause a disruption of service. The Traffic Management Microkernel (TMM) data plane is exposed to this issue; the control plane is not exposed.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, Websafe software version 12.0.0 to 12.1.2, 11.6.0 to 11.6.1, 11.4.0 to 11.5.4, 11.2.1, in some cases TMM may crash when processing TCP traffic. This vulnerability affects TMM via a virtual server configured with TCP profile. Traffic processing is disrupted while Traffic Management Microkernel (TMM) restarts. If the affected BIG-IP system is configured to be part of a device group, it will trigger a failover to the peer device.

SSL virtual servers in F5 BIG-IP systems 10.x before 10.2.4 HF9, 11.x before 11.2.1 HF12, 11.3.0 before HF10, 11.4.0 before HF8, 11.4.1 before HF5, 11.5.0 before HF5, and 11.5.1 before HF5, when used with third-party Secure Sockets Layer (SSL) accelerator cards, might allow remote attackers to have unspecified impact via a timing side-channel attack.

On F5 BIG-IP 13.0.0, 12.0.0-12.1.2, 11.6.1-11.6.3.1, 11.5.1-11.5.5, or 11.2.1, when processing DIAMETER transactions with carefully crafted attribute-value pairs, TMM may crash.

When F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.5.1-11.5.6 is processing specially crafted TCP traffic with the Large Receive Offload (LRO) feature enabled, TMM may crash, leading to a failover event. This vulnerability is not exposed unless LRO is enabled, so most affected customers will be on 13.1.x. LRO has been available since 11.4.0 but is not enabled by default until 13.1.0.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0 and 12.0.0 - 12.1.2, undisclosed traffic patterns sent to BIG-IP virtual servers, with the TCP Fast Open and Tail Loss Probe options enabled in the associated TCP profile, may cause a disruption of service to the Traffic Management Microkernel (TMM).

On F5 BIG-IP systems running 13.0.0, 12.1.0 - 12.1.3.1, or 11.6.1 - 11.6.2, every Multipath TCP (MCTCP) connection established leaks a small amount of memory. Virtual server using TCP profile with Multipath TCP (MCTCP) feature enabled will be affected by this issue.

In some circumstances, on F5 BIG-IP systems running 13.0.0, 12.1.0 - 12.1.3.1, any 11.6.x or 11.5.x release, or 11.2.1, TCP DNS profile allows excessive buffering due to lack of flow control.

In versions 13.0.0-13.0.0 HF2, 12.1.0-12.1.2 HF1, and 11.6.1-11.6.2, BIG-IP platforms with Cavium Nitrox SSL hardware acceleration cards, a Virtual Server configured with a Client SSL profile, and using Anonymous (ADH) or Ephemeral (DHE) Diffie-Hellman key exchange and Single DH use option not enabled in the options list may be vulnerable to crafted SSL/TLS Handshakes that may result with a PMS (Pre-Master Secret) that starts in a 0 byte and may lead to a recovery of plaintext messages as BIG-IP TLS/SSL ADH/DHE sends different error messages acting as an oracle. Similar error messages when PMS starts with 0 byte coupled with very precise timing measurement observation may also expose this vulnerability.

On BIG-IP 14.0.0-14.0.0.2 or 13.0.0-13.1.1.1, in certain circumstances, when processing traffic through a Virtual Server with an associated MQTT profile, the TMM process may produce a core file and take the configured HA action.

On BIG-IP 11.5.1-11.6.3.2, 12.1.3.4-12.1.3.7, 13.0.0 HF1-13.1.1.1, and 14.0.0-14.0.0.2, Multi-Path TCP (MPTCP) does not protect against multiple zero length DATA_FINs in the reassembly queue, which can lead to an infinite loop in some circumstances.

On BIG-IP 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.6.0-11.6.5.1, the tmm crashes under certain circumstances when using the connector profile if a specific sequence of connections are made.

On BIG-IP (LTM, AAM, AFM, Analytics, APM, ASM, DNS, FPS, GTM, Link Controller, PEM) versions 15.1.0-15.1.0.5, 14.1.0-14.1.2.3, and 13.1.0-13.1.3.3, when handling MQTT traffic through a BIG-IP virtual server associated with an MQTT profile and an iRule performing manipulations on that traffic, TMM may produce a core file.

On BIG-IP 11.5.1-11.5.4, 11.6.1, and 12.1.0, a virtual server configured with a Client SSL profile may be vulnerable to a chosen ciphertext attack against CBC ciphers. When exploited, this may result in plaintext recovery of encrypted messages through a man-in-the-middle (MITM) attack, despite the attacker not having gained access to the server's private key itself. (CVE-2019-6593 also known as Zombie POODLE and GOLDENDOODLE.)

BIG-IP HTTP profile vulnerability

In BIG-IP versions 15.1.0-15.1.0.4, 15.0.0-15.0.1.3, 14.1.0-14.1.2.3, 13.1.0-13.1.3.4, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.2 and BIG-IQ versions 5.2.0-7.0.0, the host OpenSSH servers utilize keys of less than 2048 bits which are no longer considered secure.

BIG-IP SSL vulnerability

On all versions of BIG-IP 12.1.x and 11.6.x, the original TLS protocol includes a weakness in the master secret negotiation that is mitigated by the Extended Master Secret (EMS) extension defined in RFC 7627. TLS connections that do not use EMS are vulnerable to man-in-the-middle attacks during renegotiation. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

On F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.3.3, or 11.2.1-11.6.3.1, administrative users by way of undisclosed methods can exploit the ssldump utility to write to arbitrary file paths. For users who do not have Advanced Shell access (for example, any user when licensed for Appliance Mode), this allows more permissive file access than intended.

When BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.1.0-2.3.0, or Enterprise Manager 3.1.1 is licensed for Appliance Mode, Admin and Resource administrator roles can by-pass BIG-IP Appliance Mode restrictions to overwrite critical system files. Attackers of high privilege level are able to overwrite critical system files which bypasses security controls in place to limit TMSH commands. This is possible with an administrator or resource administrator roles when granted TMSH. Resource administrator roles must have TMSH access in order to perform this attack.

The BIG-IP 15.0.0-15.0.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5.1, BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1 configuration utility is vulnerable to Anti DNS Pinning (DNS Rebinding) attack.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, and 12.1.0-12.1.5.1 and BIG-IQ 5.2.0-7.1.0, when creating a QKView, credentials for binding to LDAP servers used for remote authentication of the BIG-IP administrative interface will not fully obfuscate if they contain whitespace.

On versions 11.2.1. and greater, unrestricted Snapshot File Access allows BIG-IP system's user with any role, including Guest Role, to have access and download previously generated and available snapshot files on the BIG-IP configuration utility such as QKView and TCPDumps.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, under certain circumstances, attackers can decrypt configuration items that are encrypted because the vCMP configuration unit key is generated with insufficient randomness. The attack prerequisite is direct access to encrypted configuration and/or UCS files.

On BIG-IP versions 15.0.0-15.1.0, 14.0.0-14.1.2.3, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IQ versions 7.0.0, 6.0.0-6.1.0, and 5.0.0-5.4.0, iWorkflow version 2.3.0, and Enterprise Manager version 3.1.1, authenticated users granted TMOS Shell (tmsh) privileges are able access objects on the file system which would normally be disallowed by tmsh restrictions. This allows for authenticated, low privileged attackers to access objects on the file system which would not normally be allowed.

BIG-IP DNS TSIG Key vulnerability

BIGIP and BIG-IQ TACACS+ audit log Vulnerability

In versions 16.0.0-16.0.0.1, 15.1.0-15.1.0.5, and 14.1.0-14.1.2.3, a stored cross-site scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Traffic Management User Interface (TMUI), also known as the BIG-IP Configuration utility.

In BIG-IP versions 15.0.0-15.1.0.4, 14.1.0-14.1.2.6, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1 and BIG-IQ versions 5.4.0-7.0.0, Self-IP port-lockdown bypass via IPv6 link-local addresses.

On F5 BIG-IP 13.0.0-13.1.0.5 or 12.0.0-12.1.3.3, malicious root users with access to a VCMP guest can cause a disruption of service on adjacent VCMP guests running on the same host. Exploiting this vulnerability causes the vCMPd process on the adjacent VCMP guest to restart and produce a core file. This issue is only exploitable on a VCMP guest which is operating in "host-only" or "bridged" mode. VCMP guests which are "isolated" are not impacted by this issue and do not provide mechanism to exploit the vulnerability. Guests which are deployed in "Appliance Mode" may be impacted however the exploit is not possible from an Appliance Mode guest. To exploit this vulnerability root access on a guest system deployed as "host-only" or "bridged" mode is required.

BIG-IP Configuration utility vulnerability

BIG-IP Configuration utility CSRF vulnerability

An Information Disclosure vulnerability exists in NTP 4.2.7p25 private (mode 6/7) messages via a GET_RESTRICT control message, which could let a malicious user obtain sensitive information.

Under certain conditions, on F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.3.1, or 11.6.1 HF2-11.6.3.1, virtual servers configured with Client SSL or Server SSL profiles which make use of network hardware security module (HSM) functionality are exposed and impacted by this issue.

Features in F5 BIG-IP 13.0.0-13.1.0.3, 12.1.0-12.1.3.1, 11.6.1-11.6.3.1, 11.5.1-11.5.5, or 11.2.1 system that utilizes inflate functionality directly, via an iRule, or via the inflate code from PEM module are subjected to a service disruption via a "Zip Bomb" attack.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.2, 12.1.0-12.1.4.1, 11.5.2-11.6.4, when processing authentication attempts for control-plane users MCPD leaks a small amount of memory. Under rare conditions attackers with access to the management interface could eventually deplete memory on the system.

A remote attacker may be able to disrupt services on F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.1, or 11.2.1-11.5.6 if the TMM virtual server is configured with a HTML or a Rewrite profile. TMM may restart while processing some specially prepared HTML content from the back end.