F5 Big-ip Webaccelerator any version

A race condition when discarding malformed packets can cause BIND to exit with an assertion failure

SSL virtual servers in F5 BIG-IP systems 10.x before 10.2.4 HF9, 11.x before 11.2.1 HF12, 11.3.0 before HF10, 11.4.0 before HF8, 11.4.1 before HF5, 11.5.0 before HF5, and 11.5.1 before HF5, when used with third-party Secure Sockets Layer (SSL) accelerator cards, might allow remote attackers to have unspecified impact via a timing side-channel attack.

On F5 BIG-IP 13.0.0, 12.0.0-12.1.2, 11.6.1-11.6.3.1, 11.5.1-11.5.5, or 11.2.1, when processing DIAMETER transactions with carefully crafted attribute-value pairs, TMM may crash.

When F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.5.1-11.5.6 is processing specially crafted TCP traffic with the Large Receive Offload (LRO) feature enabled, TMM may crash, leading to a failover event. This vulnerability is not exposed unless LRO is enabled, so most affected customers will be on 13.1.x. LRO has been available since 11.4.0 but is not enabled by default until 13.1.0.

On F5 BIG-IP systems running 13.0.0, 12.1.0 - 12.1.3.1, or 11.6.1 - 11.6.2, every Multipath TCP (MCTCP) connection established leaks a small amount of memory. Virtual server using TCP profile with Multipath TCP (MCTCP) feature enabled will be affected by this issue.

In some circumstances, on F5 BIG-IP systems running 13.0.0, 12.1.0 - 12.1.3.1, any 11.6.x or 11.5.x release, or 11.2.1, TCP DNS profile allows excessive buffering due to lack of flow control.

On BIG-IP 14.0.0-14.0.0.2 or 13.0.0-13.1.1.1, in certain circumstances, when processing traffic through a Virtual Server with an associated MQTT profile, the TMM process may produce a core file and take the configured HA action.

On BIG-IP 11.5.1-11.6.3.2, 12.1.3.4-12.1.3.7, 13.0.0 HF1-13.1.1.1, and 14.0.0-14.0.0.2, Multi-Path TCP (MPTCP) does not protect against multiple zero length DATA_FINs in the reassembly queue, which can lead to an infinite loop in some circumstances.

On BIG-IP 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.6.0-11.6.5.1, the tmm crashes under certain circumstances when using the connector profile if a specific sequence of connections are made.

On BIG-IP 11.5.1-11.5.4, 11.6.1, and 12.1.0, a virtual server configured with a Client SSL profile may be vulnerable to a chosen ciphertext attack against CBC ciphers. When exploited, this may result in plaintext recovery of encrypted messages through a man-in-the-middle (MITM) attack, despite the attacker not having gained access to the server's private key itself. (CVE-2019-6593 also known as Zombie POODLE and GOLDENDOODLE.)

BIG-IP SSL vulnerability

On F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.3.3, or 11.2.1-11.6.3.1, administrative users by way of undisclosed methods can exploit the ssldump utility to write to arbitrary file paths. For users who do not have Advanced Shell access (for example, any user when licensed for Appliance Mode), this allows more permissive file access than intended.

When BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.1.0-2.3.0, or Enterprise Manager 3.1.1 is licensed for Appliance Mode, Admin and Resource administrator roles can by-pass BIG-IP Appliance Mode restrictions to overwrite critical system files. Attackers of high privilege level are able to overwrite critical system files which bypasses security controls in place to limit TMSH commands. This is possible with an administrator or resource administrator roles when granted TMSH. Resource administrator roles must have TMSH access in order to perform this attack.

The BIG-IP 15.0.0-15.0.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5.1, BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1 configuration utility is vulnerable to Anti DNS Pinning (DNS Rebinding) attack.

On versions 11.2.1. and greater, unrestricted Snapshot File Access allows BIG-IP system's user with any role, including Guest Role, to have access and download previously generated and available snapshot files on the BIG-IP configuration utility such as QKView and TCPDumps.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, under certain circumstances, attackers can decrypt configuration items that are encrypted because the vCMP configuration unit key is generated with insufficient randomness. The attack prerequisite is direct access to encrypted configuration and/or UCS files.

On BIG-IP versions 15.0.0-15.1.0, 14.0.0-14.1.2.3, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IQ versions 7.0.0, 6.0.0-6.1.0, and 5.0.0-5.4.0, iWorkflow version 2.3.0, and Enterprise Manager version 3.1.1, authenticated users granted TMOS Shell (tmsh) privileges are able access objects on the file system which would normally be disallowed by tmsh restrictions. This allows for authenticated, low privileged attackers to access objects on the file system which would not normally be allowed.

BIGIP and BIG-IQ TACACS+ audit log Vulnerability

In versions 16.0.0-16.0.0.1, 15.1.0-15.1.0.5, and 14.1.0-14.1.2.3, a stored cross-site scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Traffic Management User Interface (TMUI), also known as the BIG-IP Configuration utility.

On F5 BIG-IP 13.0.0-13.1.0.5 or 12.0.0-12.1.3.3, malicious root users with access to a VCMP guest can cause a disruption of service on adjacent VCMP guests running on the same host. Exploiting this vulnerability causes the vCMPd process on the adjacent VCMP guest to restart and produce a core file. This issue is only exploitable on a VCMP guest which is operating in "host-only" or "bridged" mode. VCMP guests which are "isolated" are not impacted by this issue and do not provide mechanism to exploit the vulnerability. Guests which are deployed in "Appliance Mode" may be impacted however the exploit is not possible from an Appliance Mode guest. To exploit this vulnerability root access on a guest system deployed as "host-only" or "bridged" mode is required.

BIG-IP Configuration utility vulnerability

BIG-IP Configuration utility CSRF vulnerability

An Information Disclosure vulnerability exists in NTP 4.2.7p25 private (mode 6/7) messages via a GET_RESTRICT control message, which could let a malicious user obtain sensitive information.

Under certain conditions, on F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.3.1, or 11.6.1 HF2-11.6.3.1, virtual servers configured with Client SSL or Server SSL profiles which make use of network hardware security module (HSM) functionality are exposed and impacted by this issue.

Features in F5 BIG-IP 13.0.0-13.1.0.3, 12.1.0-12.1.3.1, 11.6.1-11.6.3.1, 11.5.1-11.5.5, or 11.2.1 system that utilizes inflate functionality directly, via an iRule, or via the inflate code from PEM module are subjected to a service disruption via a "Zip Bomb" attack.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.2, 12.1.0-12.1.4.1, 11.5.2-11.6.4, when processing authentication attempts for control-plane users MCPD leaks a small amount of memory. Under rare conditions attackers with access to the management interface could eventually deplete memory on the system.

A remote attacker may be able to disrupt services on F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.1, or 11.2.1-11.5.6 if the TMM virtual server is configured with a HTML or a Rewrite profile. TMM may restart while processing some specially prepared HTML content from the back end.

On F5 BIG-IP 13.0.0, 12.1.0-12.1.2, 11.6.0-11.6.3.1, or 11.2.1-11.5.6 a domain name cached within the DNS Cache of TMM may continue to be resolved by the cache even after the parent server revokes the record, if the DNS Cache is receiving a stream of requests for the cached name.

In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, SNMP exposes sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is inserted into various profile types and accessed using SNMPv2.

On BIG-IP versions 15.0.0-15.0.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, and 13.1.0-13.1.3.1, the TMM process may restart when the packet filter feature is enabled.

On BIG-IP 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, SNMP may expose sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is used with various profile types and is accessed using SNMPv2.

BIG-IP iControl REST vulnerability

BIG-IP iControl REST vulnerability

On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, Administrator and Resource Administrator roles might exploit TMSH access to bypass Appliance Mode restrictions on BIG-IP systems.

On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, users with the Resource Administrator role can modify sensitive portions of the filesystem if provided Advanced Shell Access, such as editing /etc/passwd. This allows modifications to user objects and is contrary to our definition for the Resource Administrator (RA) role restrictions.

On F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.2, or 11.2.1-11.6.3.1, Enterprise Manager 3.1.1, BIG-IQ Centralized Management 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, or F5 iWorkflow 2.0.2-2.3.0, authenticated users granted TMOS Shell (tmsh) access can access objects on the file system which would normally be disallowed by tmsh restrictions. This allows for authenticated, low privileged attackers to exfiltrate objects on the file system which should not be allowed.

BIG-IP TMUI XSS vulnerability

On an F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.3.1, or 11.2.1-11.6.3.1 system configured in Appliance mode, the TMOS Shell (tmsh) may allow an administrative user to use the dig utility to gain unauthorized access to file system resources.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, when the BIG-IP system is licensed for Appliance mode, a user with either the Administrator or the Resource Administrator role can bypass Appliance mode restrictions.