NETGEAR LBR20 any version

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects EX6200v2 before 1.0.1.86, EX6250 before 1.0.0.134, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, LBR1020 before 2.6.3.58, LBR20 before 2.6.3.50, R7800 before 1.0.2.80, R8900 before 1.0.5.26, R9000 before 1.0.5.26, RBS50Y before 2.7.3.22, WNR2000v5 before 1.0.0.76, XR700 before 1.0.1.36, EX6150v2 before 1.0.1.98, EX7300 before 1.0.2.158, EX7320 before 1.0.0.134, RAX10 before 1.0.2.88, RAX120 before 1.2.0.16, RAX70 before 1.0.2.88, EX6100v2 before 1.0.1.98, EX6400 before 1.0.2.158, EX7300v2 before 1.0.0.134, R6700AX before 1.0.2.88, RAX120v2 before 1.2.0.16, RAX78 before 1.0.2.88, EX6410 before 1.0.0.134, RBR10 before 2.7.3.22, RBR20 before 2.7.3.22, RBR350 before 4.3.4.7, RBR40 before 2.7.3.22, RBR50 before 2.7.3.22, EX6420 before 1.0.0.134, RBS10 before 2.7.3.22, RBS20 before 2.7.3.22, RBS350 before 4.3.4.7, RBS40 before 2.7.3.22, RBS50 before 2.7.3.22, EX6400v2 before 1.0.0.134, RBK12 before 2.7.3.22, RBK20 before 2.7.3.22, RBK352 before 4.3.4.7, RBK40 before 2.7.3.22, and RBK50 before 2.7.3.22.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7800 before 1.0.1.64, EX6200v2 before 1.0.1.86, EX6250 before 1.0.0.134, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, LBR20 before 2.6.3.50, R7800 before 1.0.2.80, R8900 before 1.0.5.26, R9000 before 1.0.5.26, RAX120 before 1.2.0.16, RBS50Y before 1.0.0.56, WNR2000v5 before 1.0.0.76, XR450 before 2.3.2.114, XR500 before 2.3.2.114, XR700 before 1.0.1.36, EX6150v2 before 1.0.1.98, EX7300 before 1.0.2.158, EX7320 before 1.0.0.134, EX6100v2 before 1.0.1.98, EX6400 before 1.0.2.158, EX7300v2 before 1.0.0.134, EX6410 before 1.0.0.134, RBR10 before 2.6.1.44, RBR20 before 2.6.2.104, RBR40 before 2.6.2.104, RBR50 before 2.7.2.102, EX6420 before 1.0.0.134, RBS10 before 2.6.1.44, RBS20 before 2.6.2.104, RBS40 before 2.6.2.104, RBS50 before 2.7.2.102, EX6400v2 before 1.0.0.134, RBK12 before 2.6.1.44, RBK20 before 2.6.2.104, RBK40 before 2.6.2.104, and RBK50 before 2.7.2.102.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects LBR20 before 2.6.3.50, RBS50Y before 2.7.3.22, RBR10 before 2.7.3.22, RBR20 before 2.7.3.22, RBR40 before 2.7.3.22, RBR50 before 2.7.3.22, RBS10 before 2.7.3.22, RBS20 before 2.7.3.22, RBS40 before 2.7.3.22, RBS50 before 2.7.3.22, RBK12 before 2.7.3.22, RBK20 before 2.7.3.22, RBK40 before 2.7.3.22, and RBK50 before 2.7.3.22.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the circled daemon. A crafted circleinfo.txt file can trigger an overflow of a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15879.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR R7800 firmware version 1.0.2.76. Authentication is not required to exploit this vulnerability. The specific flaw exists within the refresh_status.aspx endpoint. The issue results from a lack of authentication required to start a service on the server. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12360.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR Nighthawk R7800. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the rc_service parameter provided to apply_bind.cgi. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12303.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 firmware version 1.0.2.76. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the vendor_specific DHCP opcode. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12216.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 firmware version 1.0.2.76. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the rc_service parameter provided to apply_save.cgi. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12355.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR Nighthawk R7800. Authentication is not required to exploit this vulnerability The specific flaw exists within handling of firmware updates. The issue results from a fallback to a insecure protocol to deliver updates. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12308.

NETGEAR R7800 net-cgi Out-Of-Bounds Write Remote Code Execution Vulnerability

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R7800. Authentication is not required to exploit this vulnerability. The specific flaw exists within the apply_save.cgi endpoint. This issue results from the use of hard-coded encryption key. An attacker can leverage this vulnerability to execute arbitrary code in the context of root. Was ZDI-CAN-12287.

This vulnerability allows network-adjacent attackers to compromise the integrity of downloaded information on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the downloading of files via HTTPS. The issue results from the lack of proper validation of the certificate presented by the server. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-15797.

Insufficient authentication and input validation in certain NETGEAR products

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.66, EX2700 before 1.0.1.68, WN3000RPv2 before 1.0.0.90, WN3000RPv3 before 1.0.2.100, LBR1020 before 2.6.5.20, LBR20 before 2.6.5.32, R6700AX before 1.0.10.110, R7800 before 1.0.2.86, R8900 before 1.0.5.38, R9000 before 1.0.5.38, RAX10 before 1.0.10.110, RAX120v1 before 1.2.3.28, RAX120v2 before 1.2.3.28, RAX70 before 1.0.10.110, RAX78 before 1.0.10.110, XR450 before 2.3.2.130, XR500 before 2.3.2.130, and XR700 before 1.0.1.46.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D7800 before 1.0.1.64, EX6250 before 1.0.0.134, EX7700 before 1.0.0.222, LBR20 before 2.6.3.50, RBS50Y before 2.7.3.22, R8900 before 1.0.5.26, R9000 before 1.0.5.26, XR450 before 2.3.2.66, XR500 before 2.3.2.66, XR700 before 1.0.1.36, EX7320 before 1.0.0.134, RAX120 before 1.2.2.24, EX7300v2 before 1.0.0.134, RAX120v2 before 1.2.2.24, EX6410 before 1.0.0.134, RBR10 before 2.7.3.22, RBR20 before 2.7.3.22, RBR40 before 2.7.3.22, RBR50 before 2.7.3.22, EX6420 before 1.0.0.134, RBS10 before 2.7.3.22, RBS20 before 2.7.3.22, RBS40 before 2.7.3.22, RBS50 before 2.7.3.22, EX6400v2 before 1.0.0.134, RBK12 before 2.7.3.22, RBK20 before 2.7.3.22, RBK40 before 2.7.3.22, and RBK50 before 2.7.3.22.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects EX6100v2 before 1.0.1.106, EX6150v2 before 1.0.1.106, EX6250 before 1.0.0.146, EX6400 before 1.0.2.164, EX6400v2 before 1.0.0.146, EX6410 before 1.0.0.146, EX6420 before 1.0.0.146, EX7300 before 1.0.2.164, EX7300v2 before 1.0.0.146, EX7320 before 1.0.0.146, EX7700 before 1.0.0.222, LBR1020 before 2.6.5.16, LBR20 before 2.6.5.2, RBK352 before 4.3.4.7, RBK50 before 2.7.3.22, RBR350 before 4.3.4.7, RBR50 before 2.7.3.22, and RBS350 before 4.3.4.7.

This vulnerability allows network-adjacent attackers to compromise the integrity of downloaded information on affected installations of NETGEAR R7800 firmware version 1.0.2.76. Authentication is not required to exploit this vulnerability. The specific flaw exists within the downloading of files via FTP. The issue results from the lack of proper validation of the certificate presented by the server. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-12362.

Certain NETGEAR devices are affected by disclosure of sensitive information. A UPnP request reveals a device's serial number, which can be used for a password reset. This affects D7800 before 1.0.1.66, EX2700 before 1.0.1.68, WN3000RPv2 before 1.0.0.90, WN3000RPv3 before 1.0.2.100, LBR1020 before 2.6.5.20, LBR20 before 2.6.5.32, R6700AX before 1.0.10.110, R7800 before 1.0.2.86, R8900 before 1.0.5.38, R9000 before 1.0.5.38, RAX10 before 1.0.10.110, RAX120v1 before 1.2.3.28, RAX120v2 before 1.2.3.28, RAX70 before 1.0.10.110, RAX78 before 1.0.10.110, XR450 before 2.3.2.130, XR500 before 2.3.2.130, and XR700 before 1.0.1.46.