ASUS RT-AC2900

Main_Analysis_Content.asp in /apply.cgi on ASUS RT-AC66U, RT-AC68U, RT-AC86U, RT-AC88U, RT-AC1900, RT-AC2900, and RT-AC3100 devices before 3.0.0.4.384_10007; RT-N18U devices before 3.0.0.4.382.39935; RT-AC87U and RT-AC3200 devices before 3.0.0.4.382.50010; and RT-AC5300 devices before 3.0.0.4.384.20287 allows OS command injection via the pingCNT and destIP fields of the SystemCmd variable.

ASUS RT-AC51U, RT-AC58U, RT-AC66U, RT-AC1750, RT-ACRH13, and RT-N12 D1 routers with firmware before 3.0.0.4.380.8228; RT-AC52U B1, RT-AC1200 and RT-N600 routers with firmware before 3.0.0.4.380.10446; RT-AC55U and RT-AC55UHP routers with firmware before 3.0.0.4.382.50276; RT-AC86U and RT-AC2900 routers with firmware before 3.0.0.4.384.20648; and possibly other RT-series routers allow remote attackers to execute arbitrary code via unspecified vectors.

ASUS RT-A88U 3.0.0.4.386_45898 is vulnerable to Cross Site Scripting (XSS). The ASUS router admin panel does not sanitize the WiFI logs correctly, if an attacker was able to change the SSID of the router with a custom payload, they could achieve stored XSS on the device.

In ASUS RT-AX3000, ZenWiFi AX (XT8), RT-AX88U, and other ASUS routers with firmware < 3.0.0.4.386.42095 or < 9.0.0.4.386.41994, when IPv6 is used, a routing loop can occur that generates excessive network traffic between an affected device and its upstream ISP's router. This occurs when a link prefix route points to a point-to-point link, a destination IPv6 address belongs to the prefix and is not a local IPv6 address, and a router advertisement is received with at least one global unique IPv6 prefix for which the on-link flag is set.