Cisco IOS 12.0s

Multiple SSH2 servers and clients do not properly handle large packets or large fields, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code via buffer overflow attacks, as demonstrated by the SSHredder SSH protocol test suite.

Multiple SSH2 servers and clients do not properly handle packets or data elements with incorrect length specifiers, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.

Multiple SSH2 servers and clients do not properly handle strings with null characters in them when the string length is specified by a length field, which could allow remote attackers to cause a denial of service or possibly execute arbitrary code due to interactions with the use of null-terminated strings as implemented using languages such as C, as demonstrated by the SSHredder SSH protocol test suite.

Multiple SSH2 servers and clients do not properly handle lists with empty elements or strings, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.

HTTP server for Cisco IOS 11.3 to 12.2 allows attackers to bypass authentication and execute arbitrary commands, when local authorization is being used, by specifying a high access level in the URL.

Stack-based buffer overflow in the Line Printer Daemon (LPD) in Cisco IOS before 12.2(18)SXF11, 12.4(16a), and 12.4(2)T6 allow remote attackers to execute arbitrary code by setting a long hostname on the target system, then causing an error message to be printed, as demonstrated by a telnet session to the LPD from a source port other than 515.

Cisco IOS 12.0 to 12.4 might allow remote attackers to execute arbitrary code via a heap-based buffer overflow in system timers. NOTE: this issue does not correspond to a specific vulnerability, rather a general weakness that only increases the feasibility of exploitation of any vulnerabilities that might exist. Such design-level weaknesses normally are not included in CVE, so perhaps this issue should be REJECTed.

Cisco IOS 12.0 through 12.2, when IP routing is disabled, accepts false ICMP redirect messages, which allows remote attackers to cause a denial of service (network routing modification).

Cisco IOS 12.0 through 12.4 on Cisco 10000, uBR10012 and uBR7200 series devices handles external UDP packets that are sent to 127.0.0.0/8 addresses intended for IPC communication within the device, which allows remote attackers to cause a denial of service (device or linecard reload) via crafted UDP packets, a different vulnerability than CVE-2008-3805.

Cisco IOS 11.x and 12.0 through 12.2 allows remote attackers to cause a denial of service (traffic block) by sending a particular sequence of IPv4 packets to an interface on the device, causing the input queue on that interface to be marked as full.

Unspecified vulnerability in Cisco IOS 12.0 through 12.4 allows remote attackers to cause a denial of service (device reload) via a crafted Protocol Independent Multicast (PIM) packet.

The Cisco Intrusion Prevention System (IPS) and IOS with Firewall/IPS Feature Set do not properly handle certain full-width and half-width Unicode character encodings, which might allow remote attackers to evade detection of HTTP traffic.

Unspecified vulnerability in Cisco IOS 12.0 through 12.4, IOS XE 2.1.x through 2.3.x before 2.3.2, and IOS XR 3.2.x through 3.4.3, when Multiprotocol Label Switching (MPLS) and Label Distribution Protocol (LDP) are enabled, allows remote attackers to cause a denial of service (device reload or process restart) via a crafted LDP packet, aka Bug IDs CSCsz45567 and CSCsj25893.

Unspecified vulnerability in Cisco IOS 12.0 through 12.4, when SIP voice services are enabled, allows remote attackers to cause a denial of service (device crash) via a valid SIP message.

Unspecified vulnerability in Cisco IOS 12.0 through 12.4, when configured with (1) IP Service Level Agreements (SLAs) Responder, (2) Session Initiation Protocol (SIP), (3) H.323 Annex E Call Signaling Transport, or (4) Media Gateway Control Protocol (MGCP) allows remote attackers to cause a denial of service (blocked input queue on the inbound interface) via a crafted UDP packet.

Buffer overflow in Cisco IOS 11.2.x to 12.0.x allows remote attackers to cause a denial of service and possibly execute commands via a large number of OSPF neighbor announcements.

Multiple vulnerabilities in the H.323 protocol implementation for Cisco IOS 11.3T through 12.2T allow remote attackers to cause a denial of service and possibly execute arbitrary code, as demonstrated by the NISCC/OUSPG PROTOS test suite for the H.225 protocol.

The IOS HTTP service in Cisco routers and switches running IOS 11.1 through 12.1 allows remote attackers to cause a denial of service by requesting a URL that contains a %% string.

The TCP implementation in (1) Linux, (2) platforms based on BSD Unix, (3) Microsoft Windows, (4) Cisco products, and probably other operating systems allows remote attackers to cause a denial of service (connection queue exhaustion) via multiple vectors that manipulate information in the TCP state table, as demonstrated by sockstress.

Cisco IOS 12.0 through 12.2, when supporting SSH, allows remote attackers to cause a denial of service (CPU consumption) via a large packet that was designed to exploit the SSH CRC32 attack detection overflow (CVE-2001-0144).

Unspecified vulnerability in Stack Group Bidding Protocol (SGBP) support in Cisco IOS 12.0 through 12.4 running on various Cisco products, when SGBP is enabled, allows remote attackers on the local network to cause a denial of service (device hang and network traffic loss) via a crafted UDP packet to port 9900.

Memory leak in Secure Shell (SSH) in Cisco IOS 12.0 through 12.3, when authenticating against a TACACS+ server, allows remote attackers to cause a denial of service (memory consumption) via an incorrect username or password.

The (1) Cisco Unified Communications Manager Express; (2) SIP Gateway Signaling Support Over Transport Layer Security (TLS) Transport; (3) Secure Signaling and Media Encryption; (4) Blocks Extensible Exchange Protocol (BEEP); (5) Network Admission Control HTTP Authentication Proxy; (6) Per-user URL Redirect for EAPoUDP, Dot1x, and MAC Authentication Bypass; (7) Distributed Director with HTTP Redirects; and (8) TCP DNS features in Cisco IOS 12.0 through 12.4 do not properly handle IP sockets, which allows remote attackers to cause a denial of service (outage or resource consumption) via a series of crafted TCP packets.

Secure Shell (SSH) 2 in Cisco IOS 12.0 through 12.3 allows remote attackers to cause a denial of service (device reload) (1) via a username that contains a domain name when using a TACACS+ server to authenticate, (2) when a new SSH session is in the login phase and a currently logged in user issues a send command, or (3) when IOS is logging messages and an SSH session is terminated while the server is sending data.

Cisco IOS 12.0 through 12.4, when IP-based tunnels and the Cisco Express Forwarding feature are enabled, allows remote attackers to cause a denial of service (device reload) via malformed packets, aka Bug ID CSCsx70889.

Cisco IOS 12.0 through 12.4, when IP-based tunnels and the Cisco Express Forwarding feature are enabled, allows remote attackers to cause a denial of service (device reload) via a malformed packet that is not properly handled during switching from one tunnel to a second tunnel, aka Bug IDs CSCsh97579 and CSCsq31776.

CallManager Express (CME) on Cisco IOS before 15.0(1)XA allows remote authenticated users to cause a denial of service (device crash) by using an extension mobility (EM) phone to interact with the menu for SNR number changes, aka Bug ID CSCta63555.

The OSPF implementation in Cisco IOS 12.0 through 12.4 and 15.0 through 15.3, IOS-XE 2.x through 3.9.xS, ASA and PIX 7.x through 9.1, FWSM, NX-OS, and StarOS before 14.0.50488 does not properly validate Link State Advertisement (LSA) type 1 packets before performing operations on the LSA database, which allows remote attackers to cause a denial of service (routing disruption) or obtain sensitive packet information via a (1) unicast or (2) multicast packet, aka Bug IDs CSCug34485, CSCug34469, CSCug39762, CSCug63304, and CSCug39795.

A "logic error" in Cisco IOS 12.0 through 12.4, when a Multiprotocol Label Switching (MPLS) VPN with extended communities is configured, sometimes causes a corrupted route target (RT) to be used, which allows remote attackers to read traffic from other VPNs in opportunistic circumstances.

Cisco IOS 12.0 and other versions can be crashed by malicious UDP packets to the syslog port.

Cisco IOS 12.0 through 12.3YL, with BGP enabled and running the bgp log-neighbor-changes command, allows remote attackers to cause a denial of service (device reload) via a malformed BGP packet.

Cisco IOS 12.0S through 12.3YH allows remote attackers to cause a denial of service (device restart) via a crafted IPv6 packet.

Cisco IOS 12.0(5)XU through 12.1(2) allows remote attackers to read system administration and topology information via an "snmp-server host" command, which creates a readable "community" community string if one has not been previously created.

Cisco Internetwork Operating System (IOS) 12.0S through 12.3T attempts to process SNMP solicited operations on improper ports (UDP 162 and a randomly chosen UDP port), which allows remote attackers to cause a denial of service (device reload and memory corruption).

The Neighbor Discovery (ND) protocol implementation in Cisco IOS on unspecified switches allows remote attackers to bypass the Router Advertisement Guarding functionality via a fragmented IPv6 packet in which the Router Advertisement (RA) message is contained in the second fragment, as demonstrated by (1) a packet in which the first fragment contains a long Destination Options extension header or (2) a packet in which the first fragment contains an ICMPv6 Echo Request message.

Cisco IOS 11.1CC through 12.2 with Cisco Express Forwarding (CEF) enabled includes portions of previous packets in the padding of a MAC level packet when the MAC packet's length is less than the IP level packet length.

Cisco VACM (View-based Access Control MIB) for Catalyst Operating Software (CatOS) 5.5 and 6.1 and IOS 12.0 and 12.1 allows remote attackers to read and modify device configuration via the read-write community string.

In Cisco routers under some versions of IOS 12.0 running NAT, some packets may not be filtered by input access list filters.

Multiple cross-site scripting (XSS) vulnerabilities in the HTTP server in Cisco IOS 11.0 through 12.4 allow remote attackers to inject arbitrary web script or HTML via (1) the query string to the ping program or (2) unspecified other aspects of the URI.

Cisco IOS 12.0 through 12.4 and IOS XR before 3.2, with IPv6 enabled, allows remote attackers on a local network segment to cause a denial of service (device reload) and possibly execute arbitrary code via a crafted IPv6 packet.