Huawei S5700

Certain Huawei products (AP2000;IPS Module;NGFW Module;NIP6300;NIP6600;NIP6800;S5700;SVN5600;SVN5800;SVN5800-C;SeMG9811;Secospace AntiDDoS8000;Secospace USG6300;Secospace USG6500;Secospace USG6600;USG6000V;eSpace U1981) have an out-of-bounds read vulnerability. An attacker who logs in to the board may send crafted messages from the internal network port or tamper with inter-process message packets to exploit this vulnerability. Due to insufficient validation of the message, successful exploit may cause the affected board to be abnormal.

Huawei S12700 switches with software before V200R008C00SPC500 and S5700 switches with software before V200R005SPH010, when the debug switch is enabled, allows remote attackers to cause a denial of service or execute arbitrary code via crafted DNS packets.

Huawei S12700 V200R005C00, V200R006C00, V200R007C00, V200R008C00, S5700 V200R006C00, V200R007C00, V200R008C00, S6700 V200R008C00, S7700 V200R001C00, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, S9700 V200R001C00, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00 have a denial of service (DoS) vulnerability. Due to the lack of input validation, a remote attacker may craft a malformed Resource Reservation Protocol (RSVP) packet and send it to the device, causing a few buffer overflows and occasional device restart.

Some Huawei S series switches have a DoS vulnerability. An unauthenticated remote attacker can send crafted packets to the affected device to exploit this vulnerability. Due to insufficient verification of the packets, successful exploitation may cause the device reboot and denial of service (DoS) condition. (Vulnerability ID: HWPSIRT-2019-03109)

Huawei S12700 V200R008C00, V200R009C00, S5700 V200R007C00, V200R008C00, V200R009C00, S6700 V200R008C00, V200R009C00, S7700 V200R008C00, V200R009C00, S9700 V200R008C00, V200R009C00 have a numeric errors vulnerability. An unauthenticated, remote attacker may send specific TCP messages with keychain authentication option to the affected products. Due to the improper validation of the messages, it will cause numeric errors when handling the messages. Successful exploit will cause the affected products to reset.

Multiple heap-based buffer overflows in the eSap software platform in Huawei Campus S9300, S7700, S9700, S5300, S5700, S6300, and S6700 series switches; AR150, AR160, AR200, AR1200, AR2200, AR3200, AR530, NetEngine16EX, SRG1300, SRG2300, and SRG3300 series routers; and WLAN AC6005, AC6605, and ACU2 access controllers allow remote attackers to cause a denial of service (device restart) via a crafted length field in a packet.

Huawei Quidway S9700, S5700, S5300, S9300, and S7700 switches with software before V200R003SPH012 allow remote attackers to cause a denial of service (switch restart) via crafted traffic.

Huawei S5700 and S6700 with software of V200R005C00 have a DoS vulnerability due to insufficient validation of the Network Quality Analysis (NQA) packets. A remote attacker could exploit this vulnerability by sending malformed NQA packets to the target device. Successful exploitation could make the device restart.

Some Huawei products have a buffer error vulnerability. An unauthenticated, remote attacker could send specific MPLS Echo Request messages to the target products. Due to insufficient input validation of some parameters in the messages, successful exploit may cause the device to reset.

IPv6 function in Huawei Quidway S2700 V200R003C00SPC300, Quidway S5300 V200R003C00SPC300, Quidway S5700 V200R003C00SPC300, S2300 V200R003C00, V200R003C00SPC300T, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, S2700 V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, S5300 V200R003C00, V200R003C00SPC300T, V200R003C00SPC600, V200R003C02, V200R005C00, V200R005C01, V200R005C02, V200R005C03, V200R005C05, V200R006C00, V200R007C00, V200R008C00, V200R009C00, S5700 V200R003C00, V200R003C00SPC316T, V200R003C00SPC600, V200R003C02, V200R005C00, V200R005C01, V200R005C02, V200R005C03, V200R006C00, V200R007C00, V200R008C00, V200R009C00, S600-E V200R008C00, V200R009C00, S6300 V200R003C00, V200R005C00, V200R007C00, V200R008C00, V200R009C00, S6700 V200R003C00, V200R005C00, V200R005C01, V200R005C02, V200R007C00, V200R008C00, V200R009C00 has an out-of-bounds read vulnerability. An unauthenticated attacker may send crafted malformed IPv6 packets to the affected products. Due to insufficient verification of the packets, successful exploit will cause device to reset.

Huawei AC6605 with software V200R001C00; AC6605 with software V200R002C00; ACU with software V200R001C00; ACU with software V200R002C00; S2300, S3300, S2700, S3700 with software V100R006C05 and earlier versions; S5300, S5700, S6300, S6700 with software V100R006, V200R001, V200R002, V200R003, V200R005C00SPC300 and earlier versions; S7700, S9300, S9300E, S9700 with software V100R006, V200R001, V200R002, V200R003, V200R005C00SPC300 and earlier versions could allow remote attackers to send a special SSH packet to the VRP device to cause a denial of service.

Huawei Campus S3700HI with software V200R001C00SPC300; Campus S5700 with software V200R002C00SPC100; Campus S7700 with software V200R003C00SPC300,V200R003C00SPC500; LSW S9700 with software V200R001C00SPC300,V200R003C00SPC300,V200R003C00SPC500; S2350 with software V200R003C00SPC300; S2750 with software V200R003C00SPC300; S5300 with software V200R001C00SPC300,V200R002C00SPC100,V200R003C00SPC300; S5700 with software V200R001C00SPC300,V200R003C00SPC300; S6300 with software V200R001C00SPC300,V200R002C00SPC100,V200R003C00SPC300; S6700 S3300HI with software V200R001C00SPC300,V200R002C00SPC100,V200R003C00SPC300; S7700 with software V200R001C00SPC300; S9300 with software V200R001C00SPC300,V200R003C00SPC300,V200R003C00SPC500; S9300E with software V200R003C00SPC300,V200R003C00SPC500 allow attackers to keep sending malformed packets to cause a denial of service (DoS) attack, aka a heap overflow.

There is a denial of service vulnerability in the verisions V200R005C00SPC500 of S5700 and V200R005C00SPC500 of S6700. An attacker could exploit this vulnerability by sending specific message to a targeted device. Due to insufficient input validation, successful exploit can cause the service abnormal.

Memory leak in Huawei S9300, S5300, S5700, S6700, S7700, S9700, and S12700 devices allows remote attackers to cause a denial of service (memory consumption and restart) via a large number of malformed packets.

AC6005 V200R006C10SPC200,AC6605 V200R006C10SPC200,AR1200 with software V200R005C10CP0582T, V200R005C10HP0581T, V200R005C20SPC026T,AR200 with software V200R005C20SPC026T,AR3200 V200R005C20SPC026T,CloudEngine 12800 with software V100R003C00, V100R005C00, V100R005C10, V100R006C00, V200R001C00,CloudEngine 5800 with software V100R003C00, V100R005C00, V100R005C10, V100R006C00, V200R001C00,CloudEngine 6800 with software V100R003C00, V100R005C00, V100R005C10, V100R006C00, V200R001C00,CloudEngine 7800 with software V100R003C00, V100R005C00, V100R005C10, V100R006C00, V200R001C00,CloudEngine 8800 with software V100R006C00, V200R001C00,E600 V200R008C00,S12700 with software V200R005C00, V200R006C00, V200R007C00, V200R008C00,S1700 with software V100R006C00, V100R007C00, V200R006C00,S2300 with software V100R005C00, V100R006C00, V100R006C03, V100R006C05, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R005C01, V200R005C02, V200R005C03, V200R006C00, V200R007C00, V200R008C00,S2700 with software V100R005C00, V100R006C00, V100R006C03, V100R006C05, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R005C01, V200R005C02, V200R005C03, V200R006C00, V200R007C00, V200R008C00,S5300 with software V100R005C00, V100R006C00, V100R006C01, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R006C00, V200R007C00, V200R008C00,S5700 with software V100R005C00, V100R006C00, V100R006C01, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R006C00, V200R007C00, V200R008C00,S6300 with software V100R006C00, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R008C00,S6700 with software V100R006C00, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R006C00, V200R007C00, V200R008C00,S7700 with software V100R003C00, V100R006C00, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00,S9300 with software V100R001C00, V100R002C00, V100R003C00, V100R006C00, V200R001C00, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R008C10,S9700 with software V200R001C00, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00,Secospace USG6600 V500R001C00SPC050 have a MaxAge LSA vulnerability due to improper OSPF implementation. When the device receives special LSA packets, the LS (Link Status) age would be set to MaxAge, 3600 seconds. An attacker can exploit this vulnerability to poison the route table and launch a DoS attack.

Huawei S5300 with software V200R003C00, V200R007C00, V200R008C00, V200R009C00; S5700 with software V200R001C00, V200R002C00, V200R003C00, V200R005C00, V200R005C03, V200R007C00, V200R008C00, V200R009C00; S6300 with software V200R003C00, V200R005C00, V200R008C00, V200R009C00; S6700 with software V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R005C00, V200R008C00, V200R009C00; S7700 with software V200R007C00, V200R008C00, V200R009C00; S9300 with software V200R007C00, V200R008C00, V200R009C00; S9700 with software V200R007C00, V200R008C00, V200R009C00; and S12700 with software V200R007C00, V200R007C01, V200R008C00, V200R009C00 allow the attacker to cause a denial of service condition by sending malformed MPLS packets.

Huawei AR3200 with software V200R007C00, V200R005C32, V200R005C20; S12700 with software V200R008C00, V200R007C00; S5300 with software V200R008C00, V200R007C00, V200R006C00; S5700 with software V200R008C00, V200R007C00, V200R006C00; S6300 with software V200R008C00, V200R007C00; S6700 with software V200R008C00, V200R007C00; S7700 with software V200R008C00, V200R007C00, V200R006C00; S9300 with software V200R008C00, V200R007C00, V200R006C00; and S9700 with software V200R008C00, V200R007C00, V200R006C00 allow remote attackers to send abnormal Multiprotocol Label Switching (MPLS) packets to cause memory exhaustion.

Huawei switches S5700, S6700, S7700, S9700 with software V200R001C00SPC300, V200R002C00SPC100, V200R003C00SPC300, V200R005C00SPC500, V200R006C00; S12700 with software V200R005C00SPC500, V200R006C00; ACU2 with software V200R005C00SPC500, V200R006C00 have a permission control vulnerability. If a switch enables Authentication, Authorization, and Accounting (AAA) for permission control and user permissions are not appropriate, AAA users may obtain the virtual type terminal (VTY) access permission, resulting in privilege escalation.

There is a weak algorithm vulnerability in some Huawei products. The affected products use weak algorithms by default. Attackers may exploit the vulnerability to cause information leaks.

There is a denial of service vulnerability in Huawei products. A module cannot deal with specific messages due to validating inputs insufficiently. Attackers can exploit this vulnerability by sending specific messages to affected module. This can cause denial of service. Affected product versions include: S12700 V200R013C00SPC500, V200R019C00SPC500; S5700 V200R013C00SPC500, V200R019C00SPC500; S6700 V200R013C00SPC500, V200R019C00SPC500; S7700 V200R013C00SPC500, V200R019C00SPC500.

There is an out of bounds write vulnerability in some Huawei products. The vulnerability is caused by a function of a module that does not properly verify input parameter. Successful exploit could cause out of bounds write leading to a denial of service condition.Affected product versions include:IPS Module V500R005C00,V500R005C20;NGFW Module V500R005C00;NIP6600 V500R005C00,V500R005C20;S12700 V200R010C00SPC600,V200R011C10SPC500,V200R011C10SPC600,V200R013C00SPC500,V200R019C00SPC200,V200R019C00SPC500,V200R019C10SPC200,V200R020C00,V200R020C10;S1700 V200R010C00SPC600,V200R011C10SPC500,V200R011C10SPC600;S2700 V200R010C00SPC600,V200R011C10SPC500,V200R011C10SPC600;S5700 V200R010C00SPC600,V200R010C00SPC700,V200R011C10SPC500,V200R011C10SPC600,V200R019C00SPC500;S6700 V200R010C00SPC600,V200R011C10SPC500,V200R011C10SPC600;S7700 V200R010C00SPC600,V200R010C00SPC700,V200R011C10SPC500,V200R011C10SPC600;S9700 V200R010C00SPC600,V200R011C10SPC500,V200R011C10SPC600;USG9500 V500R005C00,V500R005C20.

There is a command injection vulnerability in S12700 V200R019C00SPC500, S2700 V200R019C00SPC500, S5700 V200R019C00SPC500, S6700 V200R019C00SPC500 and S7700 V200R019C00SPC500. A module does not verify specific input sufficiently. Attackers can exploit this vulnerability by sending malicious parameters to inject command. This can compromise normal service.

Huawei AR120-S V200R005C32; AR1200 V200R005C32; AR1200-S V200R005C32; AR150 V200R005C32; AR150-S V200R005C32; AR160 V200R005C32; AR200 V200R005C32; AR200-S V200R005C32; AR2200-S V200R005C32; AR3200 V200R005C32; V200R007C00; AR510 V200R005C32; NetEngine16EX V200R005C32; SRG1300 V200R005C32; SRG2300 V200R005C32; SRG3300 V200R005C32 have an out-of-bounds write vulnerability. When a user executes a query command after the device received an abnormal OSPF message, the software writes data past the end of the intended buffer due to the insufficient verification of the input data. An unauthenticated, remote attacker could exploit this vulnerability by sending abnormal OSPF messages to the device. A successful exploit could cause the system to crash.

The Huawei NE5000E, MA5200G, NE40E, NE80E, ATN, NE40, NE80, NE20E-X6, NE20, ME60, CX600, CX200, CX300, ACU, WLAN AC 6605, S9300, S7700, S2300, S3300, S5300, S3300HI, S5300HI, S5306, S6300, S2700, S3700, S5700, S6700, AR G3, H3C AR(OEM IN), AR 19, AR 29, AR 49, Eudemon100E, Eudemon200, Eudemon300, Eudemon500, Eudemon1000, Eudemon1000E-U/USG5300, Eudemon1000E-X/USG5500, Eudemon8080E/USG9300, Eudemon8160E/USG9300, Eudemon8000E-X/USG9500, E200E-C/USG2200, E200E-X3/USG2200, E200E-X5/USG2200, E200E-X7/USG2200, E200E-C/USG5100, E200E-X3/USG5100, E200E-X5/USG5100, E200E-X7/USG5100, E200E-B/USG2100, E200E-X1/USG2100, E200E-X2/USG2100, SVN5300, SVN2000, SVN5000, SVN3000, NIP100, NIP200, NIP1000, NIP2100, NIP2200, and NIP5100 use the DES algorithm for stored passwords, which makes it easier for context-dependent attackers to obtain cleartext passwords via a brute-force attack.

Huawei S5700 and S6700 have a DoS security vulnerability. Attackers with certain permissions perform specific operations on affected devices. Because the pointer in the program is not processed properly, the vulnerability can be exploited to cause the device to be abnormal.

There is an out-of-bounds read vulnerability in several products. The software reads data past the end of the intended buffer when parsing certain crafted DHCP messages. Successful exploit could cause certain service abnormal. Affected product versions include:NIP6800 versions V500R001C30,V500R001C60SPC500,V500R005C00;S12700 versions V200R008C00;S2700 versions V200R008C00;S5700 versions V200R008C00;S6700 versions V200R008C00;S7700 versions V200R008C00;S9700 versions V200R008C00;Secospace USG6600 versions V500R001C30SPC200,V500R001C30SPC600,V500R001C60SPC500,V500R005C00;USG9500 versions V500R001C30SPC300,V500R001C30SPC600,V500R001C60SPC500,V500R005C00.

Multiple Huawei Campus switches allow remote attackers to enumerate usernames via vectors involving use of SSH by the maintenance terminal.

PEM module of Huawei DP300 V500R002C00; IPS Module V500R001C00; V500R001C30; NGFW Module V500R001C00; V500R002C00; NIP6300 V500R001C00; V500R001C30; NIP6600 V500R001C00; V500R001C30; RP200 V500R002C00; V600R006C00; S12700 V200R007C00; V200R007C01; V200R008C00; V200R009C00; V200R010C00; S1700 V200R006C10; V200R009C00; V200R010C00; S2700 V200R006C10; V200R007C00; V200R008C00; V200R009C00; V200R010C00; S5700 V200R006C00; V200R007C00; V200R008C00; V200R009C00; V200R010C00; S6700 V200R008C00; V200R009C00; V200R010C00; S7700 V200R007C00; V200R008C00; V200R009C00; V200R010C00; S9700 V200R007C00; V200R007C01; V200R008C00; V200R009C00; V200R010C00; Secospace USG6300 V500R001C00; V500R001C30; Secospace USG6500 V500R001C00; V500R001C30; Secospace USG6600 V500R001C00; V500R001C30S; TE30 V100R001C02; V100R001C10; V500R002C00; V600R006C00; TE40 V500R002C00; V600R006C00; TE50 V500R002C00; V600R006C00; TE60 V100R001C01; V100R001C10; V500R002C00; V600R006C00; TP3106 V100R002C00; TP3206 V100R002C00; V100R002C10; USG9500 V500R001C00; V500R001C30; ViewPoint 9030 V100R011C02; V100R011C03 has a null pointer reference vulnerability due to insufficient verification. An authenticated local attacker calls PEM decoder with special parameter which could cause a denial of service.

Certain Huawei products (AP2000;IPS Module;NGFW Module;NIP6300;NIP6600;NIP6800;S5700;SVN5600;SVN5800;SVN5800-C;SeMG9811;Secospace AntiDDoS8000;Secospace USG6300;Secospace USG6500;Secospace USG6600;USG6000V;eSpace U1981) have a null pointer dereference vulnerability. The system dereferences a pointer that it expects to be valid, but is NULL. A local attacker could exploit this vulnerability by sending crafted parameters. A successful exploit could cause a denial of service and the process reboot.

Certain Huawei products (AP2000;IPS Module;NGFW Module;NIP6300;NIP6600;NIP6800;S5700;SVN5600;SVN5800;SVN5800-C;SeMG9811;Secospace AntiDDoS8000;Secospace USG6300;Secospace USG6500;Secospace USG6600;USG6000V;eSpace U1981) have a DoS vulnerability. An attacker may send crafted messages from a FTP client to exploit this vulnerability. Due to insufficient validation of the message, successful exploit may cause the system out-of-bounds read and result in a denial of service condition of the affected service.

Certain Huawei products (AP2000;IPS Module;NGFW Module;NIP6300;NIP6600;NIP6800;S5700;SVN5600;SVN5800;SVN5800-C;SeMG9811;Secospace) have a resource management vulnerability. An attacker who logs in to the board may send crafted messages from the internal network.

Certain Huawei products (AP2000;IPS Module;NGFW Module;NIP6300;NIP6600;NIP6800;S5700;SVN5600;SVN5800;SVN5800-C;SeMG9811;Secospace AntiDDoS8000;Secospace USG6300;Secospace USG6500;Secospace USG6600;USG6000V;eSpace U1981) have a buffer overflow vulnerability. An attacker who logs in to the board may send crafted messages from the internal network port or tamper with inter-process message packets to exploit this vulnerability. Due to insufficient validation of the message, successful exploit may cause the affected board to be abnormal.

PEM module of Huawei DP300 V500R002C00; IPS Module V500R001C00; V500R001C30; NGFW Module V500R001C00; V500R002C00; NIP6300 V500R001C00; V500R001C30; NIP6600 V500R001C00; V500R001C30; RP200 V500R002C00; V600R006C00; S12700 V200R007C00; V200R007C01; V200R008C00; V200R009C00; V200R010C00; S1700 V200R006C10; V200R009C00; V200R010C00; S2700 V200R006C10; V200R007C00; V200R008C00; V200R009C00; V200R010C00; S5700 V200R006C00; V200R007C00; V200R008C00; V200R009C00; V200R010C00; S6700 V200R008C00; V200R009C00; V200R010C00; S7700 V200R007C00; V200R008C00; V200R009C00; V200R010C00; S9700 V200R007C00; V200R007C01; V200R008C00; V200R009C00; V200R010C00; Secospace USG6300 V500R001C00; V500R001C30; Secospace USG6500 V500R001C00; V500R001C30; Secospace USG6600 V500R001C00; V500R001C30S; TE30 V100R001C02; V100R001C10; V500R002C00; V600R006C00; TE40 V500R002C00; V600R006C00; TE50 V500R002C00; V600R006C00; TE60 V100R001C01; V100R001C10; V500R002C00; V600R006C00; TP3106 V100R002C00; TP3206 V100R002C00; V100R002C10; USG9500 V500R001C00; V500R001C30; ViewPoint 9030 V100R011C02; V100R011C03 has a heap overflow vulnerability due to insufficient verification. An authenticated local attacker can make processing crash by a malicious certificate. The attacker can exploit this vulnerability to cause a denial of service.

PEM module of Huawei DP300 V500R002C00; IPS Module V500R001C00; V500R001C30; NGFW Module V500R001C00; V500R002C00; NIP6300 V500R001C00; V500R001C30; NIP6600 V500R001C00; V500R001C30; RP200 V500R002C00; V600R006C00; S12700 V200R007C00; V200R007C01; V200R008C00; V200R009C00; V200R010C00; S1700 V200R006C10; V200R009C00; V200R010C00; S2700 V200R006C10; V200R007C00; V200R008C00; V200R009C00; V200R010C00; S5700 V200R006C00; V200R007C00; V200R008C00; V200R009C00; V200R010C00; S6700 V200R008C00; V200R009C00; V200R010C00; S7700 V200R007C00; V200R008C00; V200R009C00; V200R010C00; S9700 V200R007C00; V200R007C01; V200R008C00; V200R009C00; V200R010C00; Secospace USG6300 V500R001C00; V500R001C30; Secospace USG6500 V500R001C00; V500R001C30; Secospace USG6600 V500R001C00; V500R001C30S; TE30 V100R001C02; V100R001C10; V500R002C00; V600R006C00; TE40 V500R002C00; V600R006C00; TE50 V500R002C00; V600R006C00; TE60 V100R001C01; V100R001C10; V500R002C00; V600R006C00; TP3106 V100R002C00; TP3206 V100R002C00; V100R002C10; USG9500 V500R001C00; V500R001C30; ViewPoint 9030 V100R011C02; V100R011C03 has an Out-of-Bounds memory access vulnerability due to insufficient verification. An authenticated local attacker can make processing crash by a malicious certificate. The attacker can exploit this vulnerability to cause a denial of service.

PEM module of DP300 V500R002C00; IPS Module V500R001C00; V500R001C30; NGFW Module V500R001C00; V500R002C00; NIP6300 V500R001C00; V500R001C30; NIP6600 V500R001C00; V500R001C30; RP200 V500R002C00; V600R006C00; S12700 V200R007C00; V200R007C01; V200R008C00; V200R009C00; V200R010C00; S1700 V200R006C10; V200R009C00; V200R010C00; S2700 V200R006C10; V200R007C00; V200R008C00; V200R009C00; V200R010C00; S5700 V200R006C00; V200R007C00; V200R008C00; V200R009C00; V200R010C00; S6700 V200R008C00; V200R009C00; V200R010C00; S7700 V200R007C00; V200R008C00; V200R009C00; V200R010C00; S9700 V200R007C00; V200R007C01; V200R008C00; V200R009C00; V200R010C00; Secospace USG6300 V500R001C00; V500R001C30; Secospace USG6500 V500R001C00; V500R001C30; Secospace USG6600 V500R001C00; V500R001C30S; TE30 V100R001C02; V100R001C10; V500R002C00; V600R006C00; TE40 V500R002C00; V600R006C00; TE50 V500R002C00; V600R006C00; TE60 V100R001C01; V100R001C10; V500R002C00; V600R006C00; TP3106 V100R002C00; TP3206 V100R002C00; V100R002C10; USG9500 V500R001C00; V500R001C30; ViewPoint 9030 V100R011C02; V100R011C03 has a DoS vulnerability in PEM module of Huawei products due to insufficient verification. An authenticated local attacker can make processing into deadloop by a malicious certificate. The attacker can exploit this vulnerability to cause a denial of service.

There is a use-after-free vulnerability in a Huawei product. A module cannot deal with specific operations in special scenarios. Attackers can exploit this vulnerability by performing malicious operations. This can cause memory use-after-free, compromising normal service. Affected product include some versions of NIP6300, NIP6600, NIP6800, S1700, S2700, S5700, S6700 , S7700, S9700, Secospace USG6300, Secospace USG6500, Secospace USG6600 and USG9500.

There is a weak algorithm vulnerability in some Huawei products. The affected products use the RSA algorithm in the SSL key exchange algorithm which have been considered as a weak algorithm. Attackers may exploit this vulnerability to leak some information.

Huawei AR routers with software before V200R007C00SPC100; Quidway S9300 routers with software before V200R009C00; S12700 routers with software before V200R008C00SPC500; S9300, Quidway S5300, and S5300 routers with software before V200R007C00; and S5700 routers with software before V200R007C00SPC500 make it easier for remote authenticated administrators to obtain and decrypt passwords by leveraging selection of a reversible encryption algorithm.

There has a license management vulnerability in some Huawei products. An attacker with high privilege needs to perform specific operations to exploit the vulnerability on the affected device. Due to improper license management of the device, as a result, the license file can be applied and affect integrity of the device. Affected product versions include:S12700 V200R007C01,V200R007C01B102,V200R008C00,V200R010C00SPC300,V200R011C00,V200R011C00SPC100,V200R011C10;S1700 V200R010C00SPC300,V200R011C00,V200R011C00SPC100,V200R011C10;S2700 V200R008C00,V200R010C00SPC300,V200R011C00,V200R011C00SPC100,V200R011C10;S5700 V200R008C00,V200R010C00SPC300,V200R011C00,V200R011C00SPC100,V200R011C10,V200R011C10SPC100;S6700 V200R008C00,V200R010C00SPC300,V200R011C00,V200R011C00SPC100,V200R011C10,V200R011C10SPC100;S7700 V200R008C00,V200R010C00SPC300,V200R011C00,V200R011C00SPC100,V200R011C10;S9700 V200R007C01,V200R007C01B102,V200R008C00,V200R010C00SPC300,V200R011C00,V200R011C00SPC100,V200R011C10.

Huawei AR routers with software before V200R007C00SPC100; Quidway S9300 routers with software before V200R009C00; S12700 routers with software before V200R008C00SPC500; S9300, Quidway S5300, and S5300 routers with software before V200R007C00; and S5700 routers with software before V200R007C00SPC500 makes it easier for remote authenticated administrators to obtain encryption keys and ciphertext passwords via vectors related to key storage.